JK2060AC
两相混合式步进电机驱动器
2phase hybrid stepper motor driver
概述
JK2060AC 两相混合式步进电机驱动器，采用交流24V~50V,直流30V~80V输入,，适合驱动电流小于6.0A,外径在86mm的混合式步进电机使用。此驱动器采用交流伺服驱动器的电流环进行细分控制，电机低速运行平稳，高速力矩稳定。广泛适合于各类CNC机械，机器人，切割机，包装机，绘图仪，雕刻机等，
Descriptions
JK2060AC is a type of 2 phase hybrid steppermotor driver , this driver input voltage is 24~50V AC ,30V~80V DC, suit for currentless 6.0A, diameter is 86mm 2 phase hybrid stepper motor .this driver thatadopts similar to the Circuit of servo control which enables the motor to run smoothly. It is widely used in CNC machine , robots,cuttingmachine,packing machine,plotter, engraving machine and so on.
特点
*平均电流控制，两相正弦电流输出
*交流24~60V，直流30V~80V
*光电隔离信号输入、输出
*有过压﹑欠压﹑过流﹑相间短路保护功能
*十四档细分和自动半流功能
*八档输出相电流设置
*可驱动任何6.0A相电流以下两相、四相混合式步进电机,
*主要适合驱动86mm(NEMA34)两相步进电机
Features
*Averagecurrent control,2 phase sinusoidal output current drive
*supplyvoltage from 24VAC~50VAC,30VDC~80VDC
*Opto-isolatedsignal I/O
*Overvoltage,under voltage,overcurrent,phase short cicuit protection
*14channels subdivision and automatic idle-current reduction
*8channels output phase current setting
*Can drive 2 phase and 4phase hybrid stepper motor when phase current less than 6.0A
*mainlyfor 86mm(NEMA34)2 phase stepper motor
性能指标
输入电压 交流20V~60V, 直流30V~80V
输出电流 2.0A~6.0A
温 度 工作温度-10°~45°，存放温度-20°~125°
环境湿度 不凝露，不结霜
气 体 禁止有可燃气体和导电灰尘
重 量 600克
MechanicalSpecification
Input Voltage 20~60V AC, 30~80V DC
Output current 2.0A~6.0A
Temperature working temperature -10°~45°,stockingtemperature ~20°~70°
Humidity Not condensation , no water droplets
Gas Prohibition of combustible gasesａnd conductive dust
Weight 600g
MechanicalDimension （mm）
