JK2M2208
两相混合式步进电机驱动器
2phase hybrid stepper motor driver
概述
JK2M2208 两相混合式步进电机驱动器，采用交流110V~220V，适合驱动电流小于8.0A,外径在110mm,130mm的混合式步进电机使用。电机低速运行平稳，高速力矩稳定。广泛适合于各类CNC机械，机器人，切割机，包装机，绘图仪，雕刻机等，
Descriptions
JK2M2208 is a type of 2 phase hybrid steppermotor driver , this driver input voltage is 110V~220V AC . suit for currentless 8.0A, diameter is 110mm ,130mm 2 phase hybrid stepper motor . the motorrun smoothly. It is widely used in CNCmachine , robots,cutting machine,packing machine,plotter, engraving machine andso on.
特点
*平均电流控制，两相正弦电流输出
*交流110V~220V
*光电隔离信号输入、输出
*有过压﹑欠压﹑过流﹑相间短路保护功能
*十六档细分和自动半流功能
*十六档输出相电流设置
*可驱动任何8.0A相电流以下两相、四相混合式步进电机,
*主要适合驱动110mm和130mm两相步进电机
Features
*Averagecurrent control,2 phase sinusoidal output current drive
*supplyvoltage from 110VAC~220VAC
*Opto-isolatedsignal I/O
*Overvoltage,under voltage,overcurrent,phase short cicuit protection
*16channels subdivision and automatic idle-current reduction
*16channels output phase current setting
*Can drive 2 phase and 4phase hybrid stepper motor when phase current less than 6.0A
*mainlyfor 110mm and 130mm 2 phase stepper motor
性能指标
输入电压 交流110V~220V
输出电流 0.5A~8.0A
温 度 工作温度-10°~45°，存放温度-20°~125°
环境湿度 不凝露，不结霜
气 体 禁止有可燃气体和导电灰尘
重 量 1700克
MechanicalSpecification
Input Voltage 110~220V AC
Output current 0.5A~8.0A
Temperature working temperature -10°~45°,stockingtemperature ~20°~70°
Humidity Not condensation , no water droplets
Gas Prohibition of combustible gasesａnd conductive dust
Weight 1700g
MechanicalDimension (mm)
