JK3MD2207
三相混合式数字步进电机驱动器
3phase digital hybrid stepper motor driver
概述
JK3MD2207 两相混合式步进电机驱动器，采用交流110V~220V，适合驱动电流小于7.0A,外径在110mm,130mm的三相混合式步进电机使用。电机低速运行平稳，高速力矩稳定。广泛适合于各类CNC机械，机器人，切割机，包装机，绘图仪，雕刻机等，
Descriptions
JK3MD2207 is a type of 2 phase hybrid steppermotor driver , this driver input voltage is 110V~220V AC . suit for currentless 7.0A, diameter is 110mm ,130mm 3 phase hybrid stepper motor . the motorrun smoothly. It is widely used in CNCmachine , robots,cutting machine,packing machine,plotter, engraving machine andso on.
特点
*交流110V~220V
*光电隔离信号输入、输出
*有过压﹑欠压﹑过流﹑相间短路保护功能
*十六档细分和自动半流功能
*十六档输出相电流设置
*步进电机噪音，发热，共振等实现革命性突破
*主要适合驱动110mm和130mm两相步进电机
Features
*supplyvoltage from 110VAC~220VAC
*Opto-isolatedsignal I/O
*Overvoltage,under voltage,overcurrent,phase short cicuit protection
*16channels subdivision and automatic idle-current reduction
*16channels output phase current setting
*low noise ,low hot
*mainlyfor 110mm and 130mm 3 phase stepper motor
性能指标
输入电压 交流110V~220V
输出电流 1.3 A~7.0A
温 度 工作温度-10°~45°，存放温度-20°~125°
环境湿度 不凝露，不结霜
气 体 禁止有可燃气体和导电灰尘
重 量 2300克
MechanicalSpecification
Input Voltage 110~220V AC
Output current 1.3A~7.0A
Temperature working temperature -10°~45°,stockingtemperature ~20°~70°
Humidity Not condensation , no water droplets
Gas Prohibition of combustible gasesａnd conductive dust
Weight 2300g
MechanicalDimension (mm)
