美国泰乐TYLER进口直埋式球阀
产品描述-
美国泰乐TYLER进口直埋式球阀传动时，操作者不需要进入地下，只需在地上进行传动操作即可，安全方便,在施工和维护煤气供应管道和供热供应管道时对其施工时间和施工安全的要求非常高。采用全焊接球阀，可以直执着深埋地下。利用工程技术方法施工能zui大化减少阀门控制所占空间，并且大大节省施工费用及工程时间。而且能预防煤气爆zha的危险，全焊接球阀是非常安全的阀门。
结构特点-
浮动式,固定式;
一体式焊接球阀，不会有外部泄漏等到现象;
阀坐是碳纤维增强特氟隆密封环及蝶形簧构成的，所以对压力和温度和变化适应能;
在标准压力和温度范围内不会产生任何泄漏,阀杆转动自如且密封严密;
球体的加工过程有*的计算机检测仪跟踪检测，所以球体的加工精度高;
阀体材料跟管道材质一样，不会出现应力不均，也不会由于地震及车辆经过地面时而产生变形;
可以直接埋于地下，不用建高大型阀门井，只需在地面上设置小型浅井，大大节省施工费及工程时间;可根据管道的施工及设计要求，调整阀体和长短和阀杆的高度;
球体的加工精度非常精密，操作轻便，无不良干涉;
防火、抗静电装置;
不会有外部泄漏;
特殊端口和通径,自救阀座;
垂直装置和加长阀杆;
阀杆能紧急处理油脂;
阀座润滑剂和紧急密封剂设备;
应用范围-
城市燃气：燃气输出管道、主干线及各支线供应管道等。
集中供热：大型供热设备输出管线、主干线、支线。
热交换机：管道及各回路启闭。
钢铁厂：各种流体管道、废气择放管道、煤气和热力供应管道、燃料供应管道。
各种工业设备：各种热处理管道、各种工业煤气和热力管道。
技术参数-
连接方式:法兰、对焊;
口径尺寸:1/2-20”;
工作压力:16-160Bar;。
介质温度:－20℃-120℃;
阀体材质:WCB、A105;
密封材质:PTFE;
球芯材质:实芯不锈钢球;
阀杆材质:不锈钢;
填 料:PTFE;
阀体外表:亚光紫兰。
TYLER TYLER imported direct buried ball valves
Product description -
American wessing TYLER imported directly buried type ball valve, the operator does not need to enter the underground, simply on the ground for transmission operation, safe and convenient, in the construction and maintenance of gas supply and heating supply pipe for the safety of the construction time and construction is very high. All welded ball valves can be fixed and buried deep underground. Using the latest engineering method to maximize the control space of the valve, and greatly save the construction cost and the engineering time. And can prevent the danger of gas explosion, the all-welded ball valve is a very safe valve.
Structural features -
Floating type, fixed type;
One-piece welded ball valve, no external leakage.
The valve seat is made of carbon fiber reinforced teflon sealing ring and butterfly spring, so it is suitable for pressure and temperature and change.
No leakage is produced under standard pressure and temperature range. Stem rotation is easy and tight.
The process of the ball has advanced computer detector tracking and detection, so the machining precision of the ball is high.
The body material is the same as the material of the pipe, which will not be unevenly distributed and will not be distorted by the earthquake and the vehicle passing through the ground.
It can be buried directly in the ground without having to build a large valve well. It is only needed to set up small shallow well on the ground to greatly save the construction cost and project time. Adjust body length and stem height according to the construction and design requirements of pipeline;
The machining accuracy of the ball is very precise, easy to operate and no interference.
Fire and anti-static devices;
There will be no external leakage;
Special port and size, self-rescue valve seat;
Vertical and extended stem;
The stem can handle grease urgently;
Seat lubricants and emergency sealants;
Application scope -
City gas: gas output pipeline, main line and supply pipeline of each branch.
Central heating: large heat supply equipment output pipeline, trunk line, branch line.
Heat exchanger: pipe and loop open.
Steel works: various kinds of fluid pipelines, exhaust gas selection pipes, gas and thermal supply pipelines, fuel supply pipelines.
Various industrial equipment: various heat treatment pipelines, various industrial gas and thermal piping.
Technical parameters -
Connection mode: flange, butt welding;
Diameter: 1/2-20.
Working pressure: 16-160bar; .
Medium temperature: - 20 ℃ to 120 ℃;
Body material: WCB, A105;
Sealing material: PTFE;
Ball core material: solid stainless steel ball;
Stem material: stainless steel;
Fill materials: PTFE;
Body appearance: subpurple orchid.
