美国泰乐TYLER进口全焊接球阀
产品描述-
美国泰乐TYLER进口全焊接球阀采用浮球结构,增强氟特隆密封垫,可以在频繁操作,有杂质及化学物质的情况下长寿命运行,即使在压力不稳定的情况下,阀门可以保证严密。
结构特点-
浮动式,固定式;
一体式焊接球阀，不会有外部泄漏等到现象;
阀坐是碳纤维增强特氟隆密封环及蝶形簧构成的，所以对压力和温度和变化适应能;
在标准压力和温度范围内不会产生任何泄漏,阀杆转动自如且密封严密;
球体的加工过程有*的计算机检测仪跟踪检测，所以球体的加工精度高;
阀体材料跟管道材质一样，不会出现应力不均，也不会由于地震及车辆经过地面时而产生变形;
可以直接埋于地下，不用建高大型阀门井，只需在地面上设置小型浅井，大大节省施工费及工程时间;可根据管道的施工及设计要求，调整阀体和长短和阀杆的高度;
球体的加工精度非常精密，操作轻便，无不良干涉;
防火、抗静电装置;
不会有外部泄漏;
特殊端口和通径,自救阀座;
垂直装置和加长阀杆;
阀杆能紧急处理油脂;
阀座润滑剂和紧急密封剂设备
应用范围-
城市燃气：燃气输出管道、主干线及各支线供应管道等。
集中供热：大型供热设备输出管线、主干线、支线。
热交换机：管道及各回路启闭。
钢铁厂：各种流体管道、废气择放管道、煤气和热力供应管道、燃料供应管道。
各种工业设备：各种热处理管道、各种工业煤气和热力管道。
技术参数-
连接方式:法兰、对焊;
口径尺寸:1-20”;
工作压力:16-160Bar;。
介质温度:－20℃-120℃;
阀体材质:WCB、A105;
密封材质:PTFE;
球芯材质:实芯不锈钢球;
阀杆材质:不锈钢;
填 料:PTFE;
阀体外表:亚光紫兰。变化造成变形而导致的泄漏。
产品特点-
启闭迅速、扭矩低、开关轻便;
耐磨擦耐冲击、流通能力大、防阀杆飞出;
在低温介质安全工作;
组合件具有防爆和防火结构;
防止摩擦件擦伤;
应用范围-
超低温球阀适用于天然气液化、储运设备、空分设备、制氧制氮设备、能源、冶金、石化、航天的自动化控制系统中的水、氨液、气体、液体、液氯、液氨、液氮、液化天然气、乙烯、丙烯等介质;
技术参数-
连接方式:法兰、对焊;
口径尺寸:1/2-12”;
工作压力:16-40Bar;。
介质温度:－196℃-120℃;
阀体材质:LCB、LC3、CF8;;
密封材质:LCB、LC3、CF8;9;
球芯材质:实芯不锈钢球;
阀杆材质:不锈钢;
填 料:PTFE;
阀体外表:亚光紫兰。
American TYLER TYLER imported full - welded ball valve
Product description -
American wessing TYLER import full welded ball valve structure of floating ball, enhance fluoride tron gasket, can be in frequent operation, impurities and chemicals under the condition of long running life, even in the case of pressure is not stable, the valve can guarantee closely.
Structural features -
Floating type, fixed type;
One-piece welded ball valve, no external leakage.
The valve seat is made of carbon fiber reinforced teflon sealing ring and butterfly spring, so it is suitable for pressure and temperature and change.
No leakage is produced under standard pressure and temperature range. Stem rotation is easy and tight.
The process of the ball has advanced computer detector tracking and detection, so the machining precision of the ball is high.
The body material is the same as the material of the pipe, which will not be unevenly distributed and will not be distorted by the earthquake and the vehicle passing through the ground.
It can be buried directly in the ground without having to build a large valve well. It is only needed to set up small shallow well on the ground to greatly save the construction cost and project time. Adjust body length and stem height according to the construction and design requirements of pipeline;
The machining accuracy of the ball is very precise, easy to operate and no interference.
Fire and anti-static devices;
There will be no external leakage;
Special port and size, self-rescue valve seat;
Vertical and extended stem;
The stem can handle grease urgently;
Seat lubricants and emergency sealants
Application scope -
City gas: gas output pipeline, main line and supply pipeline of each branch.
Central heating: large heat supply equipment output pipeline, trunk line, branch line.
Heat exchanger: pipe and loop open.
Steel works: various kinds of fluid pipelines, exhaust gas selection pipes, gas and thermal supply pipelines, fuel supply pipelines.
Various industrial equipment: various heat treatment pipelines, various industrial gas and thermal piping.
Technical parameters -
Connection mode: flange, butt welding;
Size: 1-20.
Working pressure: 16-160bar; .
Medium temperature: - 20 ℃ to 120 ℃;
Body material: WCB, A105;
Sealing material: PTFE;
Ball core material: solid stainless steel ball;
Stem material: stainless steel;
Fill materials: PTFE;
Body appearance: subpurple orchid. The change causes the leakage of the deformation.
Product features -
Quick opening, low torque and light switch;
Resistance to abrasion resistance, high flow capacity and anti-valve stem flying out;
Safe work in low temperature media;
The composite parts have explosion-proof and fireproof structure;
Prevent chafing;
Application scope -
Cryogenic ball valve is suitable for natural gas liquefaction, storage and transportation equipment, air separation equipment, oxygen nitrogen making equipment, energy, metallurgy, petrochemical, aerospace automatic control system of water, ammonia liquid, gas, liquid, liquid chlorine, ammonia, nitrogen, liquefied natural gas (LNG), ethylene, propylene, etc;
Technical parameters -
Connection mode: flange, butt welding;
Diameter: 1/2-12 ";
Working pressure: 16-40bar; .
Medium temperature: 196 ℃ to 120 ℃.
Body material: LCB, LC3, CF8;
Sealing material: LCB, LC3, CF8; 9.
Ball core material: solid stainless steel ball;
Stem material: stainless steel;
Fill materials: PTFE;
Body appearance: subpurple orchid.
