机床商务网
详细介绍
YDPA系列 YDPA SERIES
高精密强力钢架冲床 High Precision Power Press Machine
—为保证机器运转的相对平稳性，采用对称两只平衡器装置设计方式。
—In order to guarantee relative stationarity of machineoperation,it is necessary to balance two balancers.
—调模精密高度0.1ｍｍ，安全、便捷、可靠。
—Mouldinh-adjustment precision is as high as 0.1mm,safe,speed,ａnd reliable.
性能特点Performance feature
| 1.高刚性机架设计，采用优质钢板焊制，经过消除内应力工艺处理，提高了整机精度的稳定性和可靠性 | 1.With high rigidity rack design,they are welded with the use of high-quality steel plates,through relieving of internal stresses,so that stability and relability of the whloe machine in precision are enhanced. | ||||||||||
| 2.传动中心与机器整体的中心一致，确保冲压的精确、稳定。 | 2.Consistent driving center and machine center to guarantee accurate and stable punching. | ||||||||||
| 3.曲轴、齿轮组、连杆等部件，经硬氧化和研磨等工艺处理后，具有*的综合性能和耐度性 | 3.Through hard oxdation and grinding,such parts as bent axles,gear sets,ａnd connecting rods possess higher combination property and tolerance. | ||||||||||
| 4.采用高度灵敏、可靠的离合器/刹车器装置和国际的双联电磁阀，过载保护装置，确保压力机滑块运转及停止的精确性与安全性。 | 4.Adopt highly sensitive and reliable cluth/brake and internationally top duplex magnetic valve,as well as overload protection devices,to guarantee precision and safety for operation and stop of press rams. | ||||||||||
| 5.机器结构设计合理，便于实现自动化生产，降低成本，提高效率。 | 5.Machine's structural design shall be reasonable,for the convenience of realizing automatic production,reducing cost,ａnd improving efficiency. | ||||||||||
| 6.*的设计理念，低噪音，低消耗，节省能源。 | 6.Possess advance design concepts,low noise,low consumption,ａnd energy saving. | ||||||||||
标准配置Standard configuration
| 变频器 | Inverter |
| 油压式过载保护装置 | Hydraulic over-load protector |
| 电动式黄油润滑装置 | Electrical atomatic lubrication system |
| 手动式滑块调整装置（60Ｔｏｎｓ及以下） | Manual slide adjust device(60bns and below) |
| 电动式滑块调整装Ｓ（80Ｔｏｎｓ及以上） | Slide adjust device(8Glonsａnd above) |
| 机械式模高指示器（60Ｔｏｎｓ及以下） | Automatic die height indicator(60bns and below) |
| 电动式模高指示器（60Ｔｏｎｓ及以上） | Die hight indicator(60Tons and ablve) |
| 滑块及模具平衡装置 | Balance device |
| 旋转凸轮开关 | Rotary carm switch |
| 误送检测装置 | Misfeed detection consent |
| 电源插座 | Power supply |
| 曲轴角度指示器 | Crank angle indicator |
| 计数器 | Electrical stroke counter |
| 空气源接头 | Air source connector |
| 二度落保护装置 | Against over-run safety device |
| 喷风装置 | Air ejector |
| 维护工具及工具箱 | Maintenance tool box |
| 使用说明书 | Operation manual |
选择配置Opional configuration
| 湿式离合器 | High performance wet clutch&brake |
| 气压模垫装置 | Pneunatic die cushion device |
| 脚踏开关 | Foot switch |
| 快速换模装置（举模器、夹模器及移模臂） | Quick die change device(deifter,dampａnd die arm sepjes) |
| 滑块上部打料装置 | Slide knock-out device |
| 防震脚 | Anti-vibration press mount |
| 光电保护装置 | Photo-electronic safety device |
| 送料机（空气、机械及ＮＣ各类） | Feeder |
| 料架 | Unco iler |
| 矫正机 | Straightener |
| 机械手 | Mechanism hand |
| 模具照明装置 | Die light |
| 触摸屏（预断、预裁、总计数） | Touch screem(preset,total counter) |
| ＰＡＣ100控制系统 | PAC100 cointer system |
| 人机控制系统 | Human-computer counter system |
技术参数
| 名称 | Name | 单位 | YDPA-15 | YDPA-25A | YDPA-25 | YDPA-35 | YDPA-45 | |||||||
| 型式 | Model | V型 | V型 | V型 | H型 | V型 | H型 | V型 | H型 | |||||
| 吨数 | Capacity | ton | 15 | 25 | 25 | 35 | 45 | |||||||
| 冲力发生位置 | Rated tonnage point | mm | 1 | 3.2 | 3.2 | 1.6 | 3.2 | 1.6 | 3.2 | 1.6 | ||||
| 每分钟变速 | 变速 | Speed changing | s.p.m | 120-180 | 60-140 | 60-140 | 130-200 | 40-120 | 110-180 | 40-100 | 100-150 | |||
| 定速 | Stable speed | s.p.m | 130 | 110 | 110 | 85 | 75 | |||||||
| 行程 | Stroke | mm | 60 | 80 | 60 | 30 | 70 | 40 | 80 | 50 | ||||
| 装模高度 | Max.die he high | mm | 200 | 195 | 200 | 215 | 220 | 235 | 250 | 265 | ||||
| 滑块调整量 | Slide adjustment | mm | 50 | 50 | 50 | 55 | 60 | |||||||
| 上工作台尺寸 | Slide area | mm | 470×250×50 | 470×250×50 | 470×250×50 | 520×282×50 | 560×340×60 | |||||||
| 下工作台尺寸 | Bolster area | mm | 680×300×70 | 680×300×65 | 680×300×70 | 800×400×70 | 850×440×80 | |||||||
| 模柄孔 | Shank hole | mm | ∅38.1 | ∅38.1 | ∅38.1 | ∅38.1 | ∅38.1 | |||||||
| 主电动机 | Main motor | kw.p | 2.2×6 | 3.7×4 | 3.7×4 | 3.7×4 | 5.5×4 | |||||||
| 滑块调整电机 | Slide adjust device | 手动Manual operation | ||||||||||||
| 使用空气压力 | Air pressure | Mpa | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | |||||||
| 冲床精度 | Presses precision | GB(JIS)1 class一级 | GB(JIS)1 class一级 | GB(JIS)1 class一级 | GB(JIS)1 class一级 | GB(JIS)1 class一级 | ||||||||
| 冲床（长×宽×高） | Presses dimension | mm | 1236×830×1920 | 1280×850×2200 | 1280×850×2200 | 1380×900×2400 | 1575×950×2500 | |||||||
| 模垫能力 | Die cushion capacity | ton | — | — | — | 2.3 | 2.3 | |||||||
| 模垫行程长 | Stroke | mm | — | — | — | 50 | 50 | |||||||
| 模垫有效面积 | Die cushion effective area | mm² | — | — | — | 300×230 | 300×230 | |||||||
| 名称 | Name | 单位 | YDPA-60 | YDPA-80 | YDPA-110 | YDPA-160 | ||||||
| 型式 | Model | V型 | H型 | V型 | H型 | V型 | H型 | V型 | H型 | |||
| 吨数 | Capacity | ton | 60 | 80 | 110 | 160 | ||||||
| 冲力发生位置 | Rated tonnage point | mm | 4 | 2 | 4 | 2 | 6 | 3 | 6 | 3 | ||
| 每分钟变速 | 变速 | Speed changing | s.p.m | 35-90 | 80-120 | 35-80 | 80-120 | 30-60 | 60-90 | 20-50 | 40-70 | |
| 定速 | Stable speed | s.p.m | 65 | 65 | 50 | 35 | ||||||
| 行程 | Stroke | mm | 120 | 60 | 150 | 70 | 180 | 80 | 200 | 90 | ||
| 装模高度 | Max.die he high | mm | 310 | 340 | 340 | 380 | 360 | 410 | 400 | 450 | ||
| 滑块调整量 | Slide adjustment | mm | 75 | 80 | 80 | 100 | ||||||
| 上工作台尺寸 | Slide area | mm | 700×400×70 | 770×420×70 | 910×470×80 | 990×550×90 | ||||||
| 下工作台尺寸 | Bolster area | mm | 900×500×80 | 1000×550×90 | 1150×600×110 | 1250×760×140 | ||||||
| 模柄孔 | Shank hole | mm | ∅50 | ∅50 | ∅50 | ∅65 | ||||||
| 主电动机 | Main motor | kw.p | 5.5×4 | 7.5×4 | 11×4 | 15×4 | ||||||
| 滑块调整电机 | Slide adjust device | 电动Electrial driving | ||||||||||
| 使用空气压力 | Air pressure | Mpa | 0.6 | 0.6 | 0.6 | 0.6 | ||||||
| 冲床精度 | Presses precision | GB(JIS)1 class一级 | GB(JIS)1 class一级 | GB(JIS)1 class一级 | GB(JIS)1 class一级 | |||||||
| 冲床（长×宽×高） | Presses dimension | mm | 1595×1000×2800 | 1800×1100×2800 | 1900×1300×3200 | 2420×1390×3465 | ||||||
| 模垫能力 | Die cushion capacity | ton | 3.6 | 3.6 | 6.3 | 10 | ||||||
| 模垫行程长 | Stroke | mm | 70 | 70 | 80 | 80 | ||||||
| 模垫有效面积 | Die cushion effective area | mm² | 350×300 | 450×310 | 500×350 | 650×420 | ||||||
| 名称 | Name | 单位 | YDPA-200 | YDPA-260 | YDPA-300 | YDPA-400 | ||||||
| 型式 | Model | V型 | H型 | V型 | H型 | V型 | H型 | V型 | H型 | |||
| 吨数 | Capacity | ton | 200 | 260 | 300 | 400 | ||||||
| 冲力发生位置 | Rated tonnage point | mm | 6 | 3 | 6 | 3 | 7 | 3.5 | 7 | 3.5 | ||
| 每分钟变速 | 变速 | Speed changing | s.p.m | 20-50 | 40-70 | 20-50 | 50-70 | 20-40 | 40-50 | 20-35 | 35-50 | |
| 定速 | Stable speed | s.p.m | 35 | 30 | 30 | 30 | ||||||
| 行程 | Stroke | mm | 200 | 90 | 200 | 100 | 250 | 150 | 280 | 170 | ||
| 装模高度 | Max.die he high | mm | 460 | 510 | 460 | 510 | 500 | 550 | 550 | 600 | ||
| 滑块调整量 | Slide adjustment | mm | 100 | 110 | 120 | 120 | ||||||
| 上工作台尺寸 | Slide area | mm | 990×550×90 | 1130×630×90 | 1130×700×110 | 1130×750×110 | ||||||
| 下工作台尺寸 | Bolster area | mm | 1350×820×140 | 1500×820×160 | 1500×840×180 | 1600×900×200 | ||||||
| 模柄孔 | Shank hole | mm | ∅65 | ∅65 | ∅65 | ∅65 | ||||||
| 主电动机 | Main motor | kw.p | 18.5×4 | 22×4 | 30×4 | 37×4 | ||||||
| 滑块调整电机 | Slide adjust device | 电动Electrial driving | ||||||||||
| 使用空气压力 | Air pressure | Mpa | 0.6 | 0.6 | 0.6 | 0.6 | ||||||
| 冲床精度 | Presses precision | GB(JIS)1 class一级 | GB(JIS)1 class一级 | GB(JIS)1 class一级 | GB(JIS)1 class一级 | |||||||
| 冲床（长×宽×高） | Presses dimension | mm | 2420×1490×3612 | 2735×1780×4070 | 2780×1850×4470 | 2870×1980×4830 | ||||||
| 模垫能力 | Die cushion capacity | ton | 10 | 14 | 14 | 14 | ||||||
| 模垫行程长 | Stroke | mm | 80 | 100 | 100 | 100 | ||||||
| 模垫有效面积 | Die cushion effective area | mm² | 650×420 | 710×480 | 810×480 | 810×480 | ||||||
外型尺寸 Over dimension
| 规格pecification | YDPA-15 | YDPA-25 | YDPA-35 | YDPA-45 | YDPA-60 | YDPA-80 | YDPA-110 | YDPA-160 | YDPA-200 | YDPA-260 | YDPA-300 | YDPA-400 | |
| A | 1080 | 1100 | 1200 | 1400 | 1420 | 1595 | 1720 | 2140 | 2140 | 2440 | 2440 | 2605 | |
| B | 740 | 840 | 900 | 950 | 1000 | 1170 | 1290 | 1390 | 1490 | 1500 | 1500 | 1950 | |
| C | 2098 | 2135 | 2345 | 2425 | 2780 | 2980 | 3195 | 3462 | 3612 | 4070 | 4070 | 4825 | |
| D | 680 | 680 | 800 | 850 | 900 | 1000 | 1150 | 1250 | 1350 | 1500 | 1500 | 1500 | |
| E | 300 | 300 | 400 | 440 | 500 | 550 | 600 | 760 | 820 | 820 | 840 | 900 | |
| F | 470 | 470 | 520 | 560 | 700 | 770 | 910 | 990 | 990 | 1130 | 1130 | 1130 | |
| G | 250 | 250 | 285 | 340 | 400 | 420 | 470 | 550 | 550 | 630 | 700 | 750 | |
| H | 785 | 800 | 790 | 790 | 785 | 830 | 830 | 900 | 900 | 995 | 1030 | 1185 | |
| I | 260 | 260 | 290 | 320 | 420 | 480 | 530 | 600 | 660 | 660 | 750 | 830 | |
| J | 432 | 444 | 488 | 502 | 526 | 534 | 616 | 660 | 720 | 880 | 890 | 970 | |
| K | 155 | 160 | 205 | 225 | 255 | 280 | 305 | 385 | 415 | 415 | 430 | 450 | |
| L | 880 | 980 | 1040 | 1170 | 1180 | 1310 | 1420 | 1760 | 1760 | 1830 | 2005 | 2180 | |
| M | 640 | 700 | 800 | 840 | 890 | 980 | 1100 | 1200 | 1300 | 1500 | 1560 | 1660 | |
| N | 528 | 540 | 620 | 670 | 720 | 780 | 920 | 1000 | 1100 | 1260 | 1300 | 1420 | |
| O | 1255 | 1275 | 1375 | 1575 | 1595 | 1770 | 1895 | 2420 | 2420 | 2735 | 2780 | 2780 | |
| P | 278 | 278 | 278 | 313 | 333 | 448 | 488 | 545 | 593 | 688 | 688 | 723 | |
| Q | 447 | 447 | 560 | 585 | 610 | 620 | 685 | 775 | 825 | 895 | 875 | 925 | |
| R | 935 | 935 | 1073 | 1130 | 1378 | 1506 | 1650 | 1910 | 1970 | 2188 | 2460 | 2595 | |
| Model | A | B | C | D | E | F | G | H | I | T型沟 |
| YDPA-15 | 240 | 120 | 90 | 470 | —— | 150 | ∅38.1 | 80 | 250 | Ⅰ |
| YDPA-25A | 240 | 120 | 90 | 470 | —— | 150 | ∅38.1 | 80 | 250 | Ⅰ |
| YDPA-25 | 240 | 120 | 90 | 470 | —— | 150 | ∅38.1 | 80 | 250 | Ⅰ |
| YDPA-35 | 280 | 140 | 120 | 520 | —— | 160 | ∅38.1 | 100 | 285 | Ⅰ |
| YDPA-45 | 300 | 150 | 120 | 560 | —— | 210 | ∅38.1 | 120 | 340 | Ⅰ |
| YDPA-60 | 320 | 160 | 150 | 700 | 220 | 220 | ∅50 | 160 | 400 | Ⅱ |
| YDPA-80 | 360 | 180 | 150 | 770 | 300 | 220 | 180 | 420 | Ⅱ | |
| YDPA-110 | 400 | 200 | 160 | 970 | 300 | 220 | ∅50 | 220 | 470 | Ⅱ |
| YDPA-160 | 440 | 220 | 220 | 990 | 300 | 175 | ∅65 | 220 | 550 | Ⅱ |
| YDPA-200 | 480 | 240 | 280 | 990 | 420 | 200 | ∅65 | 300 | 550 | Ⅱ |
| YDPA-260 | 520 | 260 | 290 | 1130 | 420 | 200 | ∅65 | 300 | 630 | Ⅱ |
| YDPA-300 | 520 | 260 | 290 | 1130 | 420 | 200 | ∅65 | 300 | 700 | Ⅱ |
| YDPA-400 | 520 | 260 | 290 | 1130 | 420 | 200 | ∅65 | 300 | 700 | Ⅱ |
机床商务网