机床商务网
详细介绍
YDPC系列 YDPC SERIES
双曲轴精密钢架冲床 Double-cank precision steel frame press
—高刚性机架设计，采用优质钢板焊制，经过消除内应力工艺处理，提高了整机精度的稳定性和可靠性能。
—With high rigidity rack desigh,they are welded with the use of high-quality steel plates,through relieving of internal stresses,so that stability and reliability of the whole machine in precision are enhanced.
性能特点Performance feature
| 1.高刚性能机架，连杆中心跨度大，抗偏载强，优化设计。 | 1.High steel performance frame,large center span of the connecting rod, strong anti partial load,optimize desigh. | ||||||||||
| 2.为保证机器运转的相对平稳性，采用对称两只平衡器装置设计方式。 | 2.In order to guarantee relative stationarity of machineoperation,it is necessary to balance two balancers. | ||||||||||
| 3.调模精密高度0.1ｍｍ，安全、便捷、可靠。 | 3.Mouldinh-adjustment precision is as high as 0.1mm,safe,speed,ａnd reliable. | ||||||||||
| 4.曲轴、齿轮组、连杆等部件，经硬氧化和研磨等工艺处理后，具有*的综合性能和耐度性 | 4.Through hard oxdation and grinding,such parts as bent axles,gear sets,ａnd connecting rods possess higher combination property and tolerance. | ||||||||||
| 5.采用高度灵敏、可靠的离合器/刹车器装置和国际的双联电磁阀，过载保护装置，确保压力机滑块运转及停止的精确性与安全性。 | 5.Adopt highly sensitive and reliable cluth/brake and internationally top duplex magnetic valve,as well as overload protection devices,to guarantee precision and safety for operation and stop of press rams. | ||||||||||
| 6.机器结构设计合理，便于实现自动化生产，降低成本，提高效率。 | 6.Machine's structural design shall be reasonable,for the convenience of realizing automatic production,reducing cost,ａnd improving efficiency. | ||||||||||
| 7.*的设计理念，低噪音，低消耗，节省能源。 | 7.Possess advance design concepts,low noise,low consumption,ａnd energy saving. | ||||||||||
| 干式离合刹车器 | Dry clutch brake |
| 易锻标准操作系统 | Standerd operating system of yiduan |
| 运转模式选择/切/寸动/安全一行程/连续 | Choice/cutting/inch/safe joumey/continuationof operating mode |
| 油压过负荷保护装置 | Oil pressure overload protection device |
| 二度落保护装置 | Over-run safety device |
| 双联电磁阀 | Duplex magnetic valve |
| 误送检测装置 | Misfeed detection consent |
| 电动滑块调整装置 | Electric slider adjusting device |
| 数字式模高指示器（单位0.1mm) | Digital moulding-height indicator(unit:0.1mm) |
| 电动黄油润滑装置 | Electric butter lubricating device |
| 累计计数器6位数 | Accumlative counter(6 digits) |
| 预调计数器6位数 | Pre-determined counter(6 digits) |
| 保养计数器6位数 | Maintenance counter(6 digits) |
| 寿命计数器6位数 | Life counter(6 digits) |
| 电子式旋转凸轮开关预备6连 | Electionic rotatry cam switch(6 connection) |
| 喷风装置1/2H-回路 | Air-blast device 1/2"one circuit |
| 空气源接头1/2--回路 | Air source connector 1/2"two circuit |
| 电源插座 | Power socket |
| 湿式离合刹车器 | Wet clutch brake |
| 模垫装置 | Die cushion device |
| Vs变速马达 | Vs variable-speed motor |
| 触摸屏装置 | Touch -screem device |
| 光电安全装置 | Photo-electronic safety device |
| 滑块上部顶料装置 | Upper slider feeding device |
| 主马达逆转装置 | Main motor inversion device |
| 脚踏开关 | Foot switch |
| 安全挡块及安全插销 | Safety dog and safety latch |
| T型双手按钮操作台 | T-type two-hａnd button operating floor |
| 附检知变联电磁阀 | Inspection variable-connection magnetic valve |
| 防震机械脚 | Anti-vibration mechanical foot |
| 上夹模器 | Rapid tooling exchange |
| 下夹模器 | Upper die clamper |
| 举模器 | Die lifter |
| 移模臂 | Mould-shift arm |
| 基础螺丝及基础板 | Basic bolt and soleplate |
| 自动送料装置 | Automatic feeder device |
| 三合一NC矫直机 | Three-in-one NC straightening feeder |
| NC滚轮送料机 | NC Roll feeder |
| 二合一料架兼矫直机 | Three-in-one feeder and straightening machine |
| 矫直机（整平机） | Leveller |
技术参数
| 名称 | Name | 单位 | YDPC-110 | YDPC-160 | YDPC-200 | YDPC-250 | YDPC-300 | |||||||
| 型式 | Model | V型 | H型 | V型 | H型 | V型 | H型 | V型 | H型 | V型 | H型 | |||
| 吨数 | Capacity | ton | 110 | 160 | 200 | 250 | 300 | |||||||
| 能力发生点 | Rated tonnage point | mm | 5 | 3 | 6 | 3 | 6 | 3 | 7 | 3.5 | 7 | 3.5 | ||
| 行程长 | Stroke | mm | 180 | 110 | 200 | 130 | 200 | 130 | 250 | 150 | 280 | 170 | ||
| 行程数 | Stable speed | s.p.m | 35-65 | 50-100 | 30-55 | 40-85 | 30-50 | 35-70 | 20-35 | 30-60 | 20-35 | 30-60 | ||
| 装模高度 | Max.die he high | mm | 400 | 435 | 450 | 485 | 500 | 550 | 550 | 605 | 550 | 605 | ||
| 滑块调整量 | Slide adjustment | mm | 100 | 100 | 100 | 120 | 120 | |||||||
| 下工作台尺寸 | Bolster area | mm | 1800×650×130 | 2000×760×150 | 2400×840×170 | 2700×900×170 | 2700×900×170 | |||||||
| 上工作台尺寸 | Slide area | mm | 1400×500×70 | 1600×550×70 | 1850×650×95 | 2100×700×95 | 2100×700×95 | |||||||
| 主电动机 | Main motor | kwxP | 11×4 | 15×4 | 18.5×4 | 22×4 | 30×4 | |||||||
| 使用空气压力 | Air pressure | Mpa | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | |||||||
| 冲床精度 | Presses precision | JIS(CNC)1 class一级 | ||||||||||||
| 模垫型式 | Die cushion model | Two plate&two cylinders二板双缸 | ||||||||||||
| 模垫能力 | Die cushion capacity | ton | 3.6×2 | 6.3×2 | 10×2 | 14×2 | 14×2 | |||||||
| 模垫行程长 | Stroke | mm | 80 | 80 | 80 | 100 | 100 | |||||||
| 模垫顶板面积 | Die cushion work part dimension | mm² | 350×235×2组 | 410×260×2组 | 540×350×2组 | 640×470×2组 | 640×470×2组 | |||||||
| 规格Specofocation | YDPC-110 | YDPC-160 | YDPC-200 | YDPC-250 | YDPC-300 | ||||||
| 型式 Model | V | H | V | H | V | H | V | H | V | H | |
| AA | 2000 | 2200 | 2350 | 2800 | 3000 | ||||||
| AB | 1900 | 2080 | 2230 | 2600 | 2800 | ||||||
| AC | 1360 | 1520 | 1670 | 2000 | 2200 | ||||||
| AD | 1800 | 2000 | 2400 | 2700 | 2700 | ||||||
| AE | 1510 | 1660 | 1780 | 2220 | 2220 | ||||||
| AF | 1400 | 1600 | 1850 | 2100 | 2100 | ||||||
| AG | 1780 | 1980 | 2130 | 2520 | 2590 | ||||||
| BA | 1745 | 1940 | 2130 | 2400 | 2545 | ||||||
| BB | 1295 | 1380 | 1640 | 2050 | 2195 | ||||||
| BC | 650 | 760 | 840 | 900 | 900 | ||||||
| BD | 330 | 385 | 425 | 455 | 488 | ||||||
| BE | 500 | 550 | 650 | 700 | 700 | ||||||
| HA | 630 | 730 | 790 | 820 | 820 | ||||||
| HB | 830 | 865 | 990 | 1025 | 1070 | 1120 | 100 | 1155 | 1100 | 1155 | |
| HC | 400 | 435 | 450 | 485 | 500 | 550 | 550 | 605 | 550 | 605 | |
| HD | 180 | 110 | 200 | 130 | 200 | 130 | 280 | 170 | 280 | 170 | |
| HE | 3059 | 3709 | 3849 | 4305 | 4304 | ||||||
| HF | 1240 | 1440 | 1570 | 1680 | 1680 | ||||||
| ∅h | ∅35 | ∅47 | ∅54 | ∅54 | ∅54 | ||||||
机床商务网