1502b 数控龙门铣床配置
1)采用高强度树脂砂铸铁
2)中国台湾主轴(罗翌、德国德意士、普森、台大),中国台湾主轴电机皮带轮及主轴皮带
3)中国台湾产增压缸(北矩、臻赏、豪澄)
4)欧洲进口齿轮驱动箱、齿条(齿轮驱动箱法国redex、齿条瑞士gudel、德国atlanta)
5)欧洲进口伺服轴减速器(德国stober、zf)
6)进口滚珠丝杆及精密锁紧螺母(丝杆为:中国台湾hiwin、pmi、西班牙shuton、bsg、美国先锋、锁紧螺母为中国台湾yinsh)
7)进口线性导轨(德国力士乐、ina,日本nsk)
8)滑动导轨系列龙门贴塑皮采用进口宝色霞板贴塑皮
9)进口轴承(日本nsk)
10)中国台湾液压平衡系统
11)中国台湾引兴x向不锈钢导轨护罩防护,y向凤琴式导轨护罩防护
12)润滑系统(日华油机、贝奇雨)
13)进口联轴器(r+w,mayr)
1502b数控龙门铣主要技术参数 | ||
tom-sp1502b龙门加工中心控制系统可随客户需求而提供配制 | ||
规格specifications |
|
|
机型项目 item model | 单位 | tom-sp1502b |
工作台面尺寸宽×长 table size(lxw) | mm | 1200×2100 |
工作台移动x轴行程 x-axis travel | mm | 2000 |
主轴滑座移动y轴行程 y-axis travel | mm | 1650 |
主轴上下移动z轴行程 z-axis travel | mm | 800 |
龙门宽度 size of machine | mm | 1650 |
主轴端面至工作台面距离 spindle nose to table | mm | 115~915 |
工作台t型槽,尺寸×间距 table-t-slot | mm | 7-22×150 |
主轴端锥度 spindle taper | mm | bt50/φ190 |
主轴传动齿轮头 spindle gear | rpm | zui高转速3000rpm |
主轴传动zf减速+直联 spindle drive zf reduction | rpm | zui高6000rpm,传动比1:1 ;4:1 |
主轴传动直联 spindle straight transfer | rpm | zui高转速6000rpm |
xyz轴滚珠丝杆规格xyz-axis ball-screw size | mm | 6310x5010x5010 |
x轴导轨规格 x-axis rail size | mm | 重载滚柱导轨55 |
y轴导轨规格 y-axis rail size | mm | 重载滚柱直线导轨55mm |
z轴导轨规格 z-axis rail size | mm | 矩型滑轨 |
x/y/z轴快速进给 x/y/z axis rapid feed | m/min | 20x20x12 |
三轴切削进给 three axis working rapid speed | mm/min | 1-8000 |
定位精度 positioning accuracy | mm | ±0.01 |
重复定位精度 repeat positioning accuracy | mm | ±0.003 |
控制器系统 control system | m70a | mitsubishi-m70a |
主轴电机 spindle motor | kw | 22 |
x轴伺服电机 x-axis servo-actuator | nm | 40 |
y轴伺服电机 y-axis servo-actuator | nm | 30 |
z轴伺服电机(抱闸)z-axis servo-actuator | nm | 30 |
气压要求pneumatic source requirement | kg/cm2 | 6 |
工作台承重table load capacity | kgs | 3000 |
电力需求power consumption | kva | 45 |
机台重量weight(approx) | kgs | 26500 |
我公司因技术研究需要,保有随时修改技术参数与外形的权利,变更时恕不另行通知。 | ||
we reserve the rights on the designing, colors,specification and termination of use of our products.changes to these factors will not be notified. |