项目	Item	VWC713	VWC714	VWC850
工作台尺寸mm	Pallet size	1000x420	1000X400	1050X500
左右行程（X）mm	X axis travel	600	600	800
前后行程（Y）mm	Y axis travel	400	400	500
上下行程（Z）mm	Z axis travel	500	500	550
主轴中心至立柱导轨距离mm	Distance from Spindle center to Columm guide	427	457	550
主轴端面至工作台面距离mm	Distance from spindle nose to table	100-600	110-610	105-665
工作台T型槽	T-type tank	3-14x100	3-14X110	3-18X150
主轴锥孔	Type of taper hole	BT40	BT40	BT40
主轴转速tpm	Max spindle speed	8000	8000	8000
主轴马达功率kw	Spindle power	3.5/5.5	3.7/5.5	7.5/11
X.Y.Z轴伺服电机kw	Three-axis servo power motor	1.0/1.0/1.5	1.0/1.0/1.5	2.0/2.0/2.0
X.Y.Z轴电机链接方式	Three-axis motor coupling	Direct Torque motor	Direct Torque motor	Direct Torque motor
X.Y.Z轴导轨方式	Three-axis rail-way	Slide-rail	Slide-rail	Slide-rail
工作台负荷kg	Max.weight on pallet	400	500	600
换刀速度 pcs	Tool changing time(tool-to-tool)	1.8	4.8	1.8
选刀方式	Tool selection mode	The nearesr	The nearesr	The nearesr
刀库容量 pcs	Tool storage capacity	16(Carousel)	16(Carousel)	24(Turntable) 20(Carousel)is option
刀具重量kg	Max.tool weight	8	8	8
刀具长度mm	Max.tool length	25	250	350
刀具直径mm	Max.tool diameter	Φ90	Φ90	Φ100(adjacent knife)/ Φ150(Adjacent no knife)
XYZ快移速度m/min	Rapid travese rate	10/10/10	10/10/10	15/15/12
切削进给速度m/min	Cutting feed speed	8	8	8
XYZ定位精度mm	Positioning precision	±0.008 ±0.006 ±0.006	±0.008 ±0.006 ±0.006	±0.008 ±0.006 ±0.006
XYZ重复定位精度mm	Repeatability	±0.004 ±0.004 ±0.004	±0.004 ±0.004 ±0.004	±0.004 ±0.004 ±0.004
机器外形mm	LxWxH	2600x2200x2650	2700X2250X2700	2700x2250x2700
机器总重kg	Weight	3000	3500	5000