项目	Item	VWC1060	VWC1370	VWC850
工作台尺寸mm	Pallet size	1300x600	1400x700	1700x800
左右行程（X）mm	X axis travel	1000	1300	1500
前后行程（Y）mm	Y axis travel	600	700	800
上下行程（Z）mm	Z axis travel	600	650	700
主轴中心至立柱导轨距离mm	Distance from Spindle center to Columm guide	630	785	800
主轴端面至工作台面距离mm	Distance from spindle nose to table	120-720	150-800	170-870
工作台T型槽	T-type tank	5-18x100	5-18x152.5	5-22x135
主轴锥孔	Type of taper hole	BT40	BT50	BT50
主轴转速tpm	Max spindle speed	8000	8000	8000
主轴马达功率kw	Spindle power	11/15	11/15	15/18.5
X.Y.Z轴伺服电机kw	Three-axis servo power motor	2.2/2.2/2.5	4/4/4	4/7.5/4
X.Y.Z轴电机链接方式	Three-axis motor coupling	Direct Torque motor	Direct Torque motor	Direct Torque motor
X.Y.Z轴导轨方式	Three-axis rail-way	Slide-rail	Slide-rail	Slide-rail
工作台负荷kg	Max.weight on pallet	800	1000	1500
换刀速度 pcs	Tool changing time(tool-to-tool)	1.8	2.5	2.5
选刀方式	Tool selection mode	The nearesr	The nearesr	The nearesr
刀库容量 pcs	Tool storage capacity	24(Turntable)	24(Turntable)	24(Turntable)
刀具重量kg	Max.tool weight	8	20	20
刀具长度mm	Max.tool length	350	350	350
刀具直径mm	Max.tool diameter	Φ80 (adjacent knife)/ Φ125(Adjacent no knife)	Φ150(adjacent knife)/ Φ250(Adjacent no knife)	Φ80(adjacent knife)/ Φ350(Adjacent no knife)
XYZ快移速度m/min	Rapid travese rate	15/15/12	15/15/12	15/15/12
切削进给速度m/min	Cutting feed speed	8	8	8
XYZ定位精度mm	Positioning precision	±0.01 ±0.008 ±0.006	±0.01 ±0.008 ±0.008	±0.0012 ±0.008 ±0.008
XYZ重复定位精度mm	Repeatability	±0.005 ±0.004 ±0.004	±0.005 ±0.004 ±0.004	±0.006 ±0.005 ±0.004
机器外形mm	LxWxH	3300x2500x2700	3800x3010x2700	4200x3100x3100
机器总重kg	Weight	6500	9500	12000