回转阀体与缸体皆采用特殊轻合金制造而成，重量轻。
回转阀经特殊设计，使得内部的轴承能充分的润滑及冷却，而能耐高速回转，增长寿命。
The rotary valve and cylinder body,all made of special light ally,lighe-weigt.
Through unique design,the rotary calve enables the inside bearing to get sufficient lubricating and coling and endure high-speed rotary for longer service life.
浅油孔配管务必单独接回油压槽，以避免产生背压。
The drain port should be independently connected to oil tank to avoid back pressure.
尺寸单位/Size unit: mm
| 规格 Spec 型号 Model | 活塞面积 Piston area cm2 押侧Extend | 活塞面积 Piston area cm2 拉侧Retract | 活塞行程 Piston stroke mm | 转速 Max RPM | 使用压力 Max.Operating Pressure Mpa(kgf/cm2) | 惯性矩 I kg*m2 | 重量 Weight kg |
|---|---|---|---|---|---|---|---|
| S-65 | 31 | 27.9 | 15 | 6000 | 3.5(35) | 0.01 | 2.9 |
| S-80 | 47.7 | 42.8 | 15 | 6000 | 3.5(35) | 0.01 | 3.4 |
| S-100 | 75.4 | 70.5 | 20 | 5500 | 3.5(35) | 0.04 | 4.9 |
| S-125 | 119.6 | 112.5 | 25 | 5500 | 3.5(35) | 0.08 | 6.8 |
| S-150 | 173.6 | 157.7 | 30 | 4000 | 4.0(40) | 0.18 | 11.5 |
| S-200 | 310 | 286.3 | 35 | 4000 | 4.0(40) | 0.38 | 20.4 |
| 规格 Spec 型号 Model | A | B | C | D | E H7 | F | G Max | G Min | H | J | K | L | M H8 | N | P |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| S-65 | 65 | 15 | 98 | 80 | 60 | 22 | 45 | 30 | 74 | 175 | M12×1.75×30 | 6~M8×16 | - | 4 | RC3/8 |
| S-80 | 80 | 15 | 112 | 90 | 65 | 25 | 45 | 30 | 74 | 175 | M16×2.0×30 | 6~M8×16 | - | 4 | RC3/8 |
| S-100 | 100 | 20 | 135 | 100 | 80 | 25 | 45 | 25 | 89 | 190 | M16×2.0×30 | 6~M10×20 | - | 4 | RC3/8 |
| S-125 | 125 | 25 | 160 | 130 | 110 | 30 | 50 | 25 | 96 | 197 | M20×2.5×35 | 6~M12×20 | - | 4 | RC3/8 |
| S-150 | 150 | 30 | 190 | 130 | 110 | 45 | 55 | 25 | 105 | 206 | M30×3.5×45 | 12~M12×24 | 31 | 5 | RC1/2 |
| S-200 | 200 | 35 | 245 | 145 | 120 | 55 | 70 | 35 | 130 | 231 | M36×4.0×60 | 12~M16×30 | 37 | 5 | RC1/2 |
