短型，高速，轻量型回转油压缸。
安装时可由后端锁固之。
For short form.lighe weight and high speed rotary cylinder.
Can screw it from the rear end of the cylinder when mounting.
浅油孔配管务必单独接回油压槽，以避免产生背压。
The drain port should be independently connectde to oil tank to avoid back pressure.
尺寸单位/Size unit: mm
| 规格 Spec 型号 Model | 活塞面积 Piston area cm2 押侧Extend | 活塞面积 Piston area cm2 拉侧Retract | 活塞行程 Piston stroke mm | 转速 Max RPM | 使用压力 Max.Operating Pressure Mpa(kgf/cm2) | 惯性矩 I kg*m2 | 重量 Weight kg |
|---|---|---|---|---|---|---|---|
| SNK-75 | 44.2 | 37.1 | 15 | 6000 | 4.0(40) | 0.01 | 2.8 |
| SNK-100 | 78.5 | 71.5 | 20 | 6000 | 4.0(40) | 0.03 | 4.3 |
| SNK-125 | 122.7 | 113.1 | 25 | 5500 | 4.0(40) | 0.05 | 6.8 |
| SNK-150 | 176.7 | 160.8 | 30 | 5500 | 4.0(40) | 0.09 | 9.4 |
| SNK-200 | 314.1 | 290.4 | 35 | 5500 | 4.0(40) | 0.28 | 15.3 |
| SNK-250 | 469.1 | 436 | 60 | 2000 | 5.0(50) | 0.4 | 45.2 |
| 规格 Spec 型号 Model | A | B | C | D1 | D2 | E H7 | F | G Max | G Min | H | J | K | L | L1 | L2 | M | N | P | Q | R | S |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SNK-75 | 75 | 15 | 107 | 90 | 90 | 65 | 30 | 45 | 30 | 57 | 148 | M20×2.5 | 6~M8×16 | M8×60 | 12 | 21 | 35 | 28 | 10 | 27.5 | 26 |
| SNK-100 | 100 | 20 | 132 | 115 | 100 | 80 | 30 | 45 | 25 | 72 | 163 | M20×2.5 | 6~M10×20 | M8×75 | 12 | 21 | 35 | 26 | 10 | 28.5 | 32 |
| SNK-125 | 125 | 25 | 160 | 140 | 130 | 110 | 35 | 50 | 25 | 82 | 172 | M24×3.0 | 6~M12×20 | M8×85 | 12 | 25 | 45 | 26 | 10 | 28.5 | 32 |
| SNK-150 | 150 | 30 | 190 | 170 | 130 | 110 | 45 | 55 | 25 | 95 | 184 | M30×3.5 | 12~M12×24 | M10×100 | 16 | 32 | 45 | 26 | 10 | 28.5 | 32 |
| SNK-200 | 200 | 35 | 245 | 220 | 145 | 120 | 55 | 70 | 35 | 115 | 201 | M36×4.0 | 12~M16×30 | M10×125 | 21 | 38 | 60 | 60 | 6 | 28.5 | 32 |
| SNK-250 | 245 | 60 | 307 | 275 | 220 | 160 | 65 | 85 | 25 | 165 | 255 | M42×3.0 | 12~M20×35 | M16×175 | 28 | 45 | 65 | 65 | 18 | 6 | 28 |
