Description		CBA-110R	CBA-110R2	CBA-110R3
Spindle
Main motor (cont. / 30 min)		18.5 / 22 kw
Spindle speed (Max.)		5 – 2000 rpm
Spindle tapper		ISO 50 / BT-50
Spindle diameter		Dia. 110 mm
Spindle end diameter		Dia. 215 mm
Max. spindle torque		860 Nm
Travel
Work table travel X axis (Horizontal)		1500 mm	2000 mm	3000 mm
Spindle travel Y axis (Vertical)		1500mm	1800 mm	2000 mm
Work table travel Z axis (Vertical)		1100 mm	1300 mm	1500 mm
Spindle travel W axis		600 mm
Rotary table
Table dimension		1250 x 1400mm	1400 x 1600 mm	1600 x 1800 mm
T-slot		22 x 7 mm.	22 x 9 mm.	22 x 9 mm
Max. loading weight		6500 kg	8500 kg	10000 kg
Index		0.001° degree
Max. rotation diameter		1877 mm	2126mm	2408 mm
Table rotation speed		0.8 rpm
Feed
Rapid feed	XYZW axis	XYZ axis = 10000 / W axis = 3000 mm / min
Feed rate	X / Y / Z axis	1 – 5000 mm / min
Feed rate	W axis	1 – 3000 mm / min

Power capacity		80	100	100
Machine dimension (L x W x H)		5100 x 8350 x 4300 mm	5400 x 8350 x 4800 mm	6350 x 8900 x 4800 mm
Machine weight		26000 kg	29000 kg	32000 kg
Controller		Fanuc / Siemens / Heidenhain

*The Specifications are subject to change without prior notice.

Moving Column

CBA-R

Feature

High productivity.

The AC digital wrap around spindle drive and motor are more accurate and responsive than traditional analog spindle drives and motors.

The spindle performance is continuously monitored to provide the most efficient cutting conditions.

Each axis is independently controlled to provide maximum feed as required.

CBA Series box way

These highly rigid box way structures give you the very best machine durability.

The material is high-frequency-heat-treat for stress relief.

The 4-in-1 design for CBA-110R and CBA-110R2 bed slide ways enhance the cutting capabilities in the Z-axis.

Rotary table

This special combination of highly rigid box ways, ball screws, and worm gear automatic lubrication system provides a highly satisfying compact rotary table design.

With the Heidenhain angle encoder installed in the rotary table center shaft, combined with our specially designed hydraulic clamping system and positioning index pins, our machines can achieve any cutting angle.

Reinforced heavy cutting angles at 0∘, 90∘, 180∘ａnd 270∘are included features.

Hence resulting in superior accuracy and cutting efficiency.

Ease of operation

Fanuc, Siemens, and Heidenhain control panels are available options.

These value added features will enhance your working capability, efficiency, and much more.

We are sure that you will be very satisfied with the high level of quality and improved machine performance.

High precision slide ways

Our auto grease lubricating system provides several advantages for the overall machine capability.

It not only maintains high accuracy during the long working hours, but also functions perfectly with low speed machining.

The high precision ball screw axis transmission provides superior machine stability resulting in highly accurate work pieces.

The CBA-110R3 provides 2 additional linear slide ways to enhance durability and eliminate unwanted deflection.

This significantly improves machine cutting accuracy.

Face plate FH-500

U axis travel : 160mm

Spindle support

Length (mm)
300

Automatic tool changer (Optional accessories)
Tool capacity	24 / 32 / 40 / 60
Tool shank	MAS 403 BT-50
Pull stud	MAS 403 P50T-1
Tool weight	25 kg
Max. tool length	300 mm
Max. tool diameter	Dia. 125 mm (Dia. 250 mm)