| Description | HMC-500A | HMC-500B | HMC-630 | HMC-800 |
| Table | ||||
| Dimensions | 500 x 500 | 500 x 500 | 630 x 630 | 800 x 800 |
| Bolt hole | 18 x 100 x 5 | M16 x 100 | M16 x P125 | M16 x P100 |
| Max. loading capacity | 400 kgs | 400 kgs | 1200 kgs | 1200 kgs |
| B minimum indexing | 1°/Opt. 0.001° | 0.001° | 1°/Opt. 0.001° | 1°/Opt. 0.001° |
| Index repeatability | ± 7" | ± 7" | ± 4" | ± 4" |
| Pallet capacity | 1 | 2 | 2 | 2 |
| Max. speed of B axis | 16.6 rpm | 16.6 rpm | 25 rpm | 25 rpm |
| Max. dia. of work piece | 630 rpm | 630 rpm | 900 rpm | 1140 rpm |
| Max. height of work piece | 610 rpm | 610 rpm | 970 rpm | 970 rpm |
| Travel | ||||
| Max. travel X/Y/Z axis | 650 / 560 / 560 mm | 650 / 560 / 560 mm | 1000 / 800 / 750 mm | 1000 / 800 / 750 mm |
| Distance from spindle nose to table center | 100 - 660 mm | 100 - 660 mm | 200 - 950 mm | 200 - 950 mm |
| Distance from spindle center to table surface | 50 - 610 mm | 50 - 610 mm | 50 - 850 mm | 50 - 850 mm |
| Spindle | ||||
| Spindle taper | ISO 40 | ISO 40 | ISO 50 | ISO 50 |
| Spindle nose outer diameter | Dia. 70 mm | Dia. 70 mm | Dia. 100 mm | Dia. 100 mm |
| Spindle speed | 8000 rpm (2 steps gear) | 8000 rpm (2 steps gear) | 6000 rpm (3 steps gear) | 6000 rpm (3 steps gear) |
| Feed | ||||
| Cutting feed rate of X / Y / Z axes | 1 - 10000 mm/min | 1 - 10000 mm/min | 1 - 5000 mm/min | 1 - 5000 mm/min |
| Rapid traverse speed of X / Y / Z axes | 30 / 24 / 30 M/min | 30 / 24 / 30 M/min | 20 M/min | 20 M/min |
| Minimum setting unit of X / Y / Z axes | 0.001 | 0.001 | 0.001 | 0.001 |
| ATC | ||||
| Tool shank type | BT40 / Opt. CAT 40 | BT40 / Opt. CAT 40 | BT50 / Opt. CAT 50 | BT50 / Opt. CAT 50 |
| Magazine capacity | 40 | 40 | 60 / Opt. 80 | 60 / Opt. 80 |
| Tool selection | Random | Random | Random | Random |
| Max. tool diameter | Dia. 76 mm | Dia. 76 mm | Dia. 130 mm | Dia. 130 mm |
| Max. tool length | 300 mm | 300 mm | 450 mm | 450 mm |
| Max. w/o adjacent tool diameter | Dia 125 mm | Dia 125 mm | Dia 230 mm | Dia 230 mm |
| Max. tool weight | 8 kgs | 8 kgs | 20 kgs | 20 kgs |
| T-T (tool to tool) | 8 sec | 8 sec | 8 sec | 8 sec |
| P-P (pallet to pallet) | 7 sec | 7 sec | 28 sec | 28 sec |
*The Specifications are subject to change without prior notice.
HMC-500 Series
40 Tool Chain Type Magazine
- The magazine id driven by a precision cam, deaturing fast and accurate tool positioning.
- The magazine accepts ISO40 tool shank.
- The selection is bi-directional and random for fast tool change.
- The magazine is separately mounted from the cutting area combined with a protection door to protect tools from contamination from chips or coolant.
HMC-500A
- 500x500 table
- 650x560x560mm travel
- Index table 1°/0.001°
- 11/15 KW Spindle notor
- Chain type 40 Tool ATC
- ISO40 Spindle Taper (Gear Drives)
- X, Y, Z axes rapid traverse 30/30/24 M/m
HMC-500B
- 500x500 table x 2
- 650x560x560mm travel
- Index table 1°/0.001°
- 11/15 KW Spindle notor
- Automatic pallet change
- Chain type 40 Tool ATC
- ISO40 Spindle Taper (Gear Drives)
- X, Y, Z axes rapid traverse 30/30/24 M/m
Rotary Table (HMC-500A)
- The rotary table employs three-piece teeth plate for high accuracy indexing.
- The three-piece teeth plate combined with hydraulic locking mechanism allows full teeth angagement. This results in higher rigidity and increased heavy cutting capacity.
Rotary Table (HMC-500B)
- The rotary table is designed with hydraulic-expansion circular locking mechanism.During locking, the complete circumferencr is completely tightened. this results in higher rigidity and increased heavy cutting resistant capability.
Automatic Pallet Change
- Swing type automatic pallet change features stable construction and smooth change motion.
- Pallet change is fast-accomplished in only 8 seconds.
- Plaaet positions on oversized cones taht guarantee high positioning accuracy.
- Max. pallet loading capacity is 400kg.
Hydraulic Balance System
The Y-axis movement is counter balanced through a hydraulic cylinder.
An accumulator is equipped in the hydraulic circuit.
This counter balance system will reduce spindle head vibration to a minimum, while significantly improving machining accuracy.
Duak Pitch Worm / Worm Gear Set
The transmission mechanism employs high efficiency "Dual Pitch Worm / Worm Gear Set" for increasing teeth engagement percentage. This outstanding feature offers increased efficiency and wear-resistant capability.
Gea Box
The spindle runnung is through a gear box, making the machine excellent for heavy cutting applications.
HMC-630 / 800
- ISO50 Spindle Taper (Gear Drives)
- X, Y, Z axes rapid traverse 20/20/20 M/m
- 800x800 table x2
- 100x800x750mm Travel
- Index table 1°/0.001°
- 15/18.5KW Spindle motor
- Automatic pallet change
- Chain type 60 Tool ATC
Hight Precision & Rigid Spindle
- Durable accurate spindle bearing and step design procide high torque, rigidity and precision.
- High torque spindle motor and spindle support bearing arrangement provide efficient cutting performance.
Automativ Tool Changer
- The tool magazine, coupled with rapid tool change and random access selection save time and offer high productivity.
- A servomotor controls the magazine to produce smooth, precise, reliable positioning.
HMC-630 / HMC-800 : STD 60, OPT:80
Automatic Pallet Change
- The APC twin pallet system is manuallu indexed for standby pallet during loading and unloading workpiece and is ideal for automatic machining.
Work Range
(unit : mm)
Floor Space
(unit : mm)
HMC-500A
HMC-500B
HMC-630
HMC-800
Table Size
(unit : mm)
HMC-500A
HMC-500B
HMC-630
HMC-800
Standard Accessories
- Mitsubishi M80 controller (HMC-500A/500B)
- Fanuc OiMF (type 1) controller (HMC-630/800)
- BT 40 gear head (HMC-500A/500B)
- BT 50 gear head (HMC-630/800)
- Spindle oil chiller
- Coolant and lubrication system
- Flushing system
- Full splash guard
- Heat exchanger for electric cabinet
- Rigid tapping
- Work light
- Tool box with tools and manuals
Options
- Coolant Through Spindle
- Chain type chip conveyor (HMC-500A and B)
- Linear scales (HMC-500A and B)
- Rotary table 0.001° indexing
- Tool setter
- Workpiece measurement
- Other controllers
- CE mark
- Transformor
