What's new: CrazyMill Cool P&S is a new 3-teeth milling cutter from Mikron Tool, specially developed for the rough and finish milling of many materials, with emphasis on stainless steels, titanium, super alloysａnd CrCo alloys. With the capacity to plunge perpendicular to the material, this tool is well adapted for the milling of slots, pockets and sides in minimal spaces. An example of these applications are the keyways that can be found in transmission shafts.
The features:
A special edge geometry provides a stable and vibration-free "Drilling" (perpendicular plunging). A correction in the center stabilizes the web (no breakout), reduces penetration force and helps increase tool life. Due to the specially designed chip space in the head of the tool, chips are evacuated into the flutes when plunging. The design of the flutes creates enough space for perfect chip evacuation and simultaneously guarantees robust stability for the lateral milling process.
In the shank, integrated ducts provide a constant and massive coolant flow instrumental for an efficient chip evacuation from the milling area. This concept is ideally suited to machine groves, slots and pockets since chips are flushed out even from tight and angled spaces. The surface quality improves significantly and reaches finishing quality when milling into solid material. Moreover, the cooling prevents an overheating of the cutting edges and thus guarantees long tool life and significantly higher chip removal compared to conventional milling. The CrazyMill Cool P&S impresses with its speed, output, performance as well as tool life and surface quality.
Diameter range: 1 mm to 8 mm
Milling depth: Type A - 2.5 x d; Type C - 5 x d
Coating: eXedur SNP
Number of teeth: 3
创新点:CrazyMill Cool P&S是一款来自Mikron Tool的新型三刃铣刀，专为多种材料的粗加工和精加工而开发，特别是不锈钢、钛、超级合金和CrCo合金。具有垂直于材料插铣的功能，该刀具非常适合在狭小的的空间内铣削槽、型腔和侧面加工。这些应用典型例子是传动轴上键槽加工。
特点:
特殊的边缘几何形状提供了稳定和无振动的“钻进”(垂直插铣)。在中心刃到外周刃都非常平滑(没有小崩口)，降低切阻力和帮助增加刀具寿命。由于刀具头部特殊设计的容屑空间，是铁屑芯在掉落时 落时被抽到容屑槽中。该刃型设计的将铁屑疏散佛足够的空间，同时保证了侧向铣削过程的稳定性。
在柄部过渡锥位置的集成通道提供了一个恒定的和大量的冷却液流动。使铁屑快速有效的撤离铣削区域。这一概念甚至可以在非常狭小的空间里把铁屑冲洗出来，是检查，插槽和型腔建工理想的创意。被加工工件表面质量明显提高，达到精加工质量。另外充分冷却降低切削刃的切削温度从而保证刀具 寿命 长 和 更好的排屑性。与 传统铣削 相比CrazyMill Cool P&S以其速度、效率、性能以及具寿命和表面质量给人留下深刻印象。
直径范围:1毫米至8毫米
铣削深度:A型- 2.5 x d;类型C - 5xd
涂料层:eXedur SNP
刃数:3刃
