型号 | Model No. | LTF280A |
两距离 | Distance between centers | 550mm/610mm/815mm |
床身上工件回转直径 | Max.swing over bed | 280mm |
床身宽度 | Width of bed | 150mm |
工件长度 | Max.length of work piece | 500mm/560mm/765mm |
中托板上工件回转直径 | Swing over middle carriage | 160mm |
主轴通孔直径 | Spindle bore | 26mm |
主轴锥孔 | Main spindle taper | MT4 |
钻铣头 | Diilling＆Milling head | 16mm |
刀架横向行程 | Max.cross stroke of toolpost | 130mm |
小刀架纵向行程 | Max.long stroke of top toolpost | 65mm |
尾架套筒的移动量 | Max. stroke ofvtailstock sleeve | 60mm |
尾座套筒锥孔 | Tailstock taper | MT2 |
主轴转速 | Main spindle | 125/210/420/620/1000/2000r |
电机 | Motor power | 750w /220&380V |
钻孔直径 | Diilling capacity(max.) | 16mm |
面铣能力 | Spindle holding fixture | 53mm |
立铣能力 | Milling capacity end mill cutter(max.) | 16mm |
主轴锥度 | Spindle holding fixture | MT2 |
套筒行程 | Sleeve travel | 52mm |
主轴电机 | Motor power | 600W |
外包装尺寸 | Packing size | 1165*580*620mm |
标准配件：三爪卡盘、挂轮、固定、油壶、后挡板、油盘及各种扳手。
特殊配件：操作杆、车刀、四爪卡盘、中心架、跟刀架、花盘、尾锥夹头、活、乱扣盘、工作灯、冷却、自紧式钻夹头、铣夹套、床脚。
