您好, 欢迎来到机床商务网
| 安装形式 | 落地式 | 布局形式 | 卧式 |
|---|---|---|---|
| 产地 | 国产 | 机床大小 | 中型 |
| 机床自重 | 3500kg | 界面语言 | 中文 |
| 控制形式 | 数控 | 外形尺寸(长×宽×高) | 2200*1760*1840mm |
| 销售区域 | 全国 |
适用于阀门卫浴行业的加工；
产品简介
详细介绍
XC-V8 V10卧式高速八轴、十轴钻铣攻卫浴专机特点
1、机床的铸件均采用灰口铸铁，经过人工时效处理，稳定性好，强度高，各项精度
稳定可靠。
The castings of machine tools are all made of grey cast iron.After arti
ficial aging treatment,the stability is good,the strength is high,and the
precision is stable and reliable.
2、机床主轴采用*的炮筒结构，轴承采用 P4 级主轴轴承，让主轴具有更高的
精度，和稳定性。
The spindle of the machine tool adopts an advanced barrel structure
and the bearings adopt P4 spindle bearings allowing the spindle to
have higher accuracy and stability.
3、机床X/Z传动的滚珠丝杆均采用中国台湾上银提供的 C3 级滚珠丝杆，滚珠丝杆俩
端均采用进口的 P4 级 60 度角接触配合组合的滚珠丝杆轴承，且俩轴滚
珠丝杆均进行预拉伸。更确保加工工件精度的稳定性。X/Z俩轴均采用直联
式联轴器连接，传动刚性强，精度稳定性高；
The ball screws of machine tool X/Z drive adopt the C3 ball screw
providedby Taiwan Shangyin. Both of the ball sctew′s two end uses
the imported P4 class 60- degree angle contact and cooperate with
the ball screw special bearing.Shaft ball screws are pre-tensioned.To
ensure the stability of the accuracy of the processing workpiece.Both
X/Z shafts are connected bya direct- coupling coupling,which has
strong transmission rigidity and highaccuracy and stability.
4、机床X/Z俩轴滑轨均采用中国台湾上银提供的 P 级。大大降低导轨间的摩擦力，消
除了导轨可能生产的爬行现象，提高了机床的运动精度；
Both X/Z axis slides of the machine tool adopt the P grade provided
by Taiwan Sapphire.The friction between the guide rails is greatly re
duced,the crawling phenomenon that the guide rails may produce is
eliminated,and the movement accuracy of the machine tool is im
proved.
5、全封闭式防护，更好地保护导轨、丝杆及轴承；
The use of fully enclosed protection,better protection of the guide,
screw and bearing;
6、采用集中式润滑油路，让机床导轨丝杆部分得到充分的润滑，大大提高机床使
用寿命和机床精度；
The use of a centralized lubrication road will allow sufficient lubrication
of the guide rail screw section of the machine tool,greatly improving
the service life of the machine tool and accuracy of the machine tool.
7、机床伺服电机采用品牌驱动电机，定位精度高，速度快，让加工效果更精确更稳
定；
The use of brand motor drive servo motor,positioning accuracy,speed,
let the processing effect is more accuratd and more stable. Machine
tool servo motor driven by brand, positioning accuracy, high speed, let
the processing effect is more accurate and stable.
XC-V8 V10 卧式高速八轴、十轴钻铣攻卫浴专机技术参数
XC-V8 V10 卧式高速八轴、十轴钻铣攻卫浴专机技术参数
机床商务网