德国 HASKEL 液压泵 dyz-秦皇岛维克托国际贸易有限公司

Petroleum base oils, Kerosene, Diesel fuel, with 5% soluble oil.
Plain Water.
Most phosphate Ester base fire resistant hydraulic fluids:e.g., Pydraul, Lindol, Cellulube, Fyrquel, and Houghtosate 1120 and Petroleum base solvents compatible with UHMWPE (Ultrahigh Molecular Weight Polyethylene) dynamic, and Viton static seals.
Petroleum base solvents,e.g., Boron fuels, Aromatic hydrocarbons( Benzene ,Toluene Xylene, Hylene, etc.);Chlorinated solvents (Trichloroethylene, Carbon Tetrachloride,? Chlorobenzene ,etc.); Mecaptans, Dowtherm A, Fluoronated solents(Fluorobenzene, Fluorochloroethylene ,etc.); Dowtherm E, plus all of group 3 plus some mildly corrosive acids compatible with wetted materials.
See note (5A) for service with Methyl-Ethy-Ketone, Methyl Acetone, Diacetone, Alcohol and Freon 22
Skydrol and Aerosafe hydraulic fluid. Acetone and some alcohols (Ethy, Methy and isopropyl).Also suitable for these fluid if viton static seals replaced with EPR, specify modification number 51331(no extra change),e.g..5133-MDTV-5.(Most Phosphate Estar base fluids solidify at approximately 206 MPa .)
Deionized water.
NOTE: a) Dynamic seal life with non-lubricating fluids will understandably be less than with lubricating type.
b) Consult factory for additional chemical resistance data.

HASKEL 1/3HP PUMP 【1/3马力（0.25Kw）haskel液体增压泵系列】

型号	序号	压缩比（增压比）	较高输出压力		排量/循环
MODEL	RATIO DASH NO.	ACTUAL AREA RATIO	MAXIMUM RATED OUTPUT PRESSURE		DISPLACE MENT /CYCLE
MODEL	RATIO DASH NO.	ACTUAL AREA RATIO	CONTINUOUS (连续输出)MPa	INTERMITTENT （间歇输出）MPa	DISPLACE MENT /CYCLE
M,MDTV,MDSTV	-5	-5.6	4.3	4.3	0.83	13.6
M, MS	-7	7.8	6.2	6.2	0.60	9.8
M, MS	-12	14	10.3	10.3	0.36	5.9
M,MS,MCPV, 29723 (1)	-21	25	17.9	17.9	0.20	3.3
	-36	41	31	31	0.12	2.0
	-71	82	60.7	60.7	.060	1.0
	-110	126	93.1	93.1	.039	0.6
M, MS (1)	-188	217	103.4	103.4	.023	0.4

Maximum intermittent pressure for stainless steel in MS, 29723 and MCPV series pumps is 69MPa

2. 较高驱动气压力0.85MPa( Maximum drive pressure0.85MPa)

型号	服务介质	材质		非金属材质
MODE	SERVICES	WETTED MATERIALS		NON METALLICS
MODE	SERVICES	泵部分 PUMP SECTION	活塞部分 PLUNGERS	NON METALLICS
M	[1]	Cad plated steel,luminum & SS	416 SS	Urethane, PTEF,Buna
MS	[1][2]	All SS	316 SS	UHMWPE, PTEE, Buna
MDTV	[1][3][5]	Separtion-Aluminum & SS	416 SS	PTFE, Viton
MDSTV	[1][2][3][4][5]	Separtion - All SS	416 SS	PTFE, Viton
MCPV	[1][2][3][4][5]	Separtion - All SS	15.5PH SS	PTFE, Viton
29723	[1][2][3][5][6]	Separtion - All SS	Hard Chrome Plated 15.5PH SS + Dichronite	UHMWPE, PTFE, Ryton