Civic Series-C-Type High Speed Precision Press-瑛瑜精密工業股份有限公司

参考价	面议

产品简介

ExcellentBalanceDynamicbalancerreservesupperdieweighttoeliminatetheinertiaproducedbyreciprocation

详细介绍

Excellent Balance

Dynamic balancer reserves upper die weight to eliminate the inertia produced by reciprocation. Vibration can be reduced to the extreme low level.

Crank Supporting

2 bearings and 2 brass bushings are applied to get smaller clearance and resist wear through years.

Guiding System

Plunger isolates slide from angular front-to-back movement of connection. Dual guide post symmetrically absorbs sideward thrust during stamping. Casting guide hole in frame enhances the strength of guiding system. Static pressure design is applied at plunger & guide posts to keep verticality and non-wearout throughout years.

Reduce Deflection During Stamping

Gap enclosure design helps to decrease deformation and increase die service life.

B.D.C. Test

Dynamic Accuracy Test

Not only JIS static accuracy checked but dynamic accuracy tests are also our standard procedures.

Start Running at Constant Speed

Press starts cotinuous running. The maximum gap is 0.1mm.
The B.D.C. keeps stable after 30 minutes during running continuously.

Running at Stable Temp. & Constant Speed

After press temp. keeps stable, press keeps running and record the B.D.C positions of 1,000 stamping. The maximum gap is ± 0.005mm

Machine Specification

Choose Model

Civic-25

Civic-35

Civic-45

Spec / Type	Unit	Civic-25
Capacity	tons	25	25	25	25
Slide stroke	mm	20	25	30	40
Press speed	spm	200 - 1200	200 - 1100	200 - 1000	200 - 800
Shut height	mm	210	205	205	200
Area of bolster	mm	500 x 300	500 x 300	500 x 300	500 x 300
Thickness of bloster	mm	80	80	80	80
Area fo slide	mm	300 x 200	300 x 200	300 x 200	300 x 200
Slide adjustment	mm	40	40	40	40
Main motor	hp	7.5	7.5	7.5	7.5

Spec / Type	Civic-25
Capacity	25 tons
Slide stroke	20 - 40 mm
Press speed	200 - 1200 spm
Shut height	200 - 210 mm
Area of bolster	500 x 300 mm
Thickness of bloster	80 mm
Area fo slide	300 x 200 mm
Slide adjustment	40 mm
Main motor	7.5 hp

Spec / Type	Unit	Civic-35
Capacity	tons	35	35	35	35
Slide stroke	mm	20	25	30	40
Press speed	spm	200 - 1200	200 - 1100	200 - 1000	200 - 800
Shut height	mm	265	260	260	255
Area of bolster	mm	600 x 380	600 x 380	600 x 380	600 x 380
Thickness of bloster	mm	100	100	100	100
Area fo slide	mm	350 x 250	350 x 250	350 x 250	350 x 250
Slide adjustment	mm	40	40	40	40
Main motor	hp	10	10	10	10

Spec / Type	Civic-35
Capacity	35 tons
Slide stroke	20 - 40 mm
Press speed	200 - 1200 spm
Shut height	255 - 265 mm
Area of bolster	600 x 380 mm
Thickness of bloster	100 mm
Area fo slide	350 x 250 mm
Slide adjustment	40 mm
Main motor	10 hp

Spec / Type	Unit	Civic-45
Capacity	tons	45	45	45	45
Slide stroke	mm	20	25	30	40
Press speed	spm	200 - 1000	200 - 900	200 - 800	200 - 700
Shut height	mm	265	260	260	255
Area of bolster	mm	700 x 450	700 x 450	700 x 450	700 x 450
Thickness of bloster	mm	120	120	120	120
Area fo slide	mm	400 x 300	400 x 300	400 x 300	400 x 300
Slide adjustment	mm	40	40	40	40
Main motor	hp	15	15	15	15

Spec / Type	Civic-45
Capacity	45 tons
Slide stroke	20 - 40 mm
Press speed	200 - 1000 spm
Shut height	255 - 265 mm
Area of bolster	700 x 450 mm
Thickness of bloster	120 mm
Area fo slide	400 x 300 mm
Slide adjustment	40 mm
Main motor	15 hp

C-Type High Speed Precision Press