机床商务网
详细介绍
FEATURES
STANDARD FEATURES
Spindles
- 10,000 - rpm Spindle Direct-Drive■
- Spindle Diameter : 60 mm on model: e-600/750■
- Spindle Diameter : 70 mm on model: e-750A/850/1000/1100/1300■
- Spindle Diameter : 90 mm on model: e-1800■
Spindles Coolant
- Spindle Coolant System (4000 BTU) on model: e-600/750/850/1000/1100/1300■
- Spindle Coolant System (8000 BTU) on model: e-1800■
- Spindle Air Blast before Tool-exchange■
- Spindle Nose Coolant Jet Flushing■
- Spindle Side Air Blow Nozzle & Coolant Nozzle■
- Spindle All-time Air Curtain■
Contorl Units
- FANUC■
- MITSUBISHI■
- SIEMENS■
- HEIDENHAIN■
Tools Magazine
- ■
- 20 pockets Arm-type Automatic Tool Change Mechanism (e-600 ~ e-1300)■
- 24 pockets Arm-type Automatic Tool Change Mechanism (e-1800)■
- 24 pockets Arm-type Automatic Tool Change Mechanism (BT#50) (e-1300 G5 / e-1800 G5)■
Chip & Coolant System
- Chip Conveyor : Screw-drive, Machine Front Side (e-600 ~ e-1000)■
- Chip Conveyor : Chain-type, Machine Front Side (e-1100 / 1300 / 1800)■
Electrics & Certification
- Maximart standard electrics system■
Safety Device & Lubrication
- Full Enclosure Machine Guard■
- Machine Auto Power-off Function■
- Z -axis Auto Ascend when Power Failure (Fanuc / Mitsubishi only)■
- ■
- 3 Colors Signal Light■
X / Y / Z Axes Movement
- X/Y/Z -axis high Precision Linear Guideway w/ Self-lube Device■
- Standard Z -axis Brake Motor■
- X/Y/Z -axis Precision C3 Grade Ball screw■
- Direct-drive transmission■
Product Options
- Air Gun & Coolant Gun■
- Rigid Tapping■
- Leveling Pads & Bolts■
- Tools & Toolbox■
- Operational Manual & Parts List■
OPTIONAL FEATURES
Spindles
- 12,000 - rpm Spindle Direct-Drive without Coolant through spindle function■
- 12,000 - rpm Spindle Direct-Drive with Coolant through spindle function■
Spindles Coolant
- 8 bar - Coolant Supply through Spindle with Filtering System■
- 20 bar - Coolant Supply through Spindle with Filtering System■
- 20 bar - Coolant Supply through Spindle with Centrifugal Separator■
- 50 bar - Coolant Supply through Spindle with Paper Bａnd Filter■
- 70 bar - Coolant Supply through Spindle with Paper Bａnd Filter■
- ** Spindle Motor w/ Coolant through Spindle (CTS) Function must be selected**■
Contorl Units
- FANUC / MITSUBISHI / SIEMENS / HEIDENHAIN Controller Upgrade■
- ■
- 24 Months warranty on control unit
Tools Magazine
- ■
- Arm-type 30 pcs tool magazine upgrade (e-600/750(A)/850/1000/1300)■
- Arm-type 48 pcs tool magazine upgrade (e-600/750(A)/850/1000/1300)■
- Arm-type 60 pcs tool magazine upgrade (e-600/750(A)/850/1000/1300)■
- Arm-type 40 pcs tool magazine upgrade BT#40 (e-1800)■
- Arm-type 32 pcs tool magazine upgrade BT#50 (e-1800)■
- Arm-type 40 pcs tool magazine upgrade BT#50 (e-1800)■
- DIN40 (DIN 69871/69872) instead of BT40 Spindle Taper■
- HSK-A63 instead of BT40 Spindle Taper■
Chip & Coolant System
- Chip Conveyor : Scraper type, left-side with Chip Cart■
- Chip Conveyor : Chain type, left-side with Chip Cart■
- Chip Cart■
- Extra Pump for Water Spray Gun■
- Coolant / Oil Skimmer■
Electrics & Certification
- CE/EMC Marking (including EN ISO13849-1)■
- Transformer to suit local Power Supply■
Safety Device & Lubrication
- Main Door (front-side) Interlock + Feed Hold Device■
- Electrical Cabinet with Main Breaker■
X / Y / Z Axes Movement
- X/Y/Z -axis under Heidenhain Absolute 0.1μm Linear Scales■
- Extended Y -axis travel to 710mm on model: e-1100/1300■
- Extended Z -axis travel 220mm on model: e-850/1000/1100/1300■
- Extended Z -axis travel 300mm on model: e-1800■
- 200mm Riser Block on Column on model: e-600/750(A)■
4th Axis preparation
- Wiring + Plug Preparation for 4th -axis w/o Driver and Motor■
- 4th -axis Driver + Motor + PLC Package■
Automation & Probing
- Renishaw - TS-27R - Tool Setting Probe system + Software■
- Renishaw - OMP400 - Workepiece Measurement + Software■
- Renishaw - RMP40 - Workpiece Measurement + Software■
- Blum - Z-Nano - Tool Setting Probe system + Software■
- Blum - ZX-Speed - Tool Setting Probe system + Software■
机床商务网