机床商务网
详细介绍
- The rigid construction bed are induction hardened over HRC50 and precision ground provides heavy duty turning and fine finishing at high accuracy.
- The main spindle is supported by selected and preloaded super precision bearings to ensure high accuracy through full speed ranges.
- The main spindle, shafts and gears in the headstock are made by high grade alloy steel, are hardened and precision ground for high speed running at lower noise level.
- The automatic lubrication pump equipped on apron provides all slide-ways and two axes ballscrews lubricants continually.
- The hardened and precision ground ballscrews for X & Z axes are mounted on high precision bearings to enable sensitive movement.
- Both X & Z axes equipped with individual electronical handwheels on control panel for manual operation as conventional lathes.
- Widely & semi-enclosed front chuck & chip guard equipped with interlock switches according to EC regulation provides safety and easy operation.
- Full length rear splash guard and front moveable chip trolley provides chip and coolants safety and easy clean ..A designed openable door on rear splash guard provide for X-Axis and home switches maintanence and adjustment easily.
- Both X & Z axes are equipped with selected controller whole package AC servo motors with its own power supply and monodrives.
- The EUCHNER automation sensor equipped on spindle speed changer to provide the exactly positions of speed range for spindle infinitely variable speed selection correctly.
- Electric positional stops in X & Z axes and tailstock to avoid any over travels. The modular input/output card evidence all control system performance for maintanence and trouble shooting easily
Unit: mm(inch)
| MODELS | 2660/2680/26120/26160 | 3060/3080/30120/30160 |
| Swing over bed | 660 (26) | 760 (30) |
| Swing over cross slide | 454 (18) | 556 (22) |
| Distance between centres | 1500 (60)/2000 (80)/3000 (120)/4000 (160) | |
| Spindle nose | D1-11/A2-11 | |
| Spindle bore | 105 (4.125)/155(6) | |
| Tailstock spindle travel | 300 (12) | |
| Tailstock barrel diameter | 105 (4.125) | |
Standard Equipment:
- Automatic lubrication pump for slideways and ballscrews
- Automatic spindle speed gear change
- Cutting fluid coolant system
- Full enclsoed end guard
- Headstock/gearbox oil cooler design
- Full length rear splash guard
- Front moveable chip trolley
- Working light
- RS-232 port
- Leveling blocks
- Centers & center sleeve
- Service tools & toolbox
- Instruction & parts manual
Optional Accessories:
- Manual type 3-jaw/4-jaw chuck
- Hydraulic hollow chuck
- Elec. 4-way toolpost
- Front mounting elec. 8-station automatic tool changer turret
- Hydraulic tailstock
- Rotating center
- Roller type steady rest
- Roller type follow rest
- Chain type chip conveyor
- Special functions by consult
机床商务网