Heavy duty lathe

HEAVY DUTY LATHE (15HP Main motor; spindle bore105mm4-1/8inch)

Model: 2480, 24120, 24160, 3080, 30120, 30160

FEATURES:

˙4-1/8in (105mm) Spindle bore; D1-11camlock spindle nose; 3-bearing spindle support.

˙18 Spindle speeds, 10-1200 rpm, withelectro-magnetic brake.

˙Electro-magnetic clutch mounted in Headstock, for spindle speed changedwithout stopping motor.

˙Automatic forced lubrication in headstock is moved by a direct motordrive lubrication gear pump, and oil tank is equipped in the leg of machine tominimize the cooling of oil.

˙Heavy duty geared head; hardened andground gears.

˙15HP Main spindle motor.

˙Quick-change universal gearbox for inch, metric, DP, MP, threading, andmultiple thread, all function without any change gears.

˙Four-way rapid carriage movement.

˙Automatic lubrication in saddle and apronassembly.

˙Adjustable overload clutch in apron toensure proper cutting load.

˙2 speeds tailstock barrel.

˙19in. (485mm) wide bed ways, inductionhardened and ground.

特點

1. 離合器車床頭設計,適合用於大型重覆性高的加工零件

2. 床頭孔徑4"105mm採用TIMKEN滾柱軸承,三點支撐,增強重切削力量

3. 主軸採用電磁剎車,加快剎車反應時間,減少機械式剎車所產生的慣性

4. 床頭與齒輪箱裝有自動循環潤滑系統,幫浦搭配潤滑油箱,加強機構潤滑,降低床頭溫低增加散熱功能

5. 齒輪箱為快速變換的萬能齒輪箱,公制,英制,模數及徑結牙都無須更換交換齒輪

6. 車牙範圍廣泛,搭配把手可輕鬆變換

7. 多頭牙也可以輕易透過手把切換直接車削

8. 床裙安裝有四方向的快送馬達系統,馬達裝有離合器,當發生碰撞時,會立即反應保護機構

9. 自動進刀裝有換向拉桿,方便使用者操做

10. 床裙內部有過負載保護裝置,當加工動作錯誤或遭到力量阻擋,離合器會自動跳脫,保護使用者安全

11. 床裙與床鞍裝有四段自動潤滑機構,當操作者使時,潤滑系統會自動打油潤滑機構

12. 尾座裝有兩段速度進給,方便使用者操作

13. 加寬床軌19"485mm,65˚的床軌設計,增加重切削穩定性

14. Y-△電氣用於重負載車床,啟動電流小,減輕工廠設備與馬達瞬間啟動的負載,降低跳電頻率。

1. The clutch headstock is suitable for bigａnd repeatability processing parts.

2. The spindle bore is105mm(4"), uses Timken roller bearings, 3-point support,make the ability of heavy-cutting stronger.

3. The spindle bore uses Electro Magneticbrake. Speed up the reaction time of brake, cut the inertia by mechanicalbrake.

4. We have Automatic lubrication system &Tank on the headstock and gearbox. The pump with lubricating oil tank canstrengthen the lubrication, lower the temperature and increase the heatdissipation.

5. The Univeral gear box with DP & MPthread need to change the exchange gear.

6. A wide ragne of threading can be easilychange by the handle

7. The multiple theading can cutting directlyby the handle switching.

8. 4 way Rapid Traverse system can protectmechanism if collision happened.

9. The steering rod of auto feed makeoperatoer easy to use.

10. The Overload safety protection inside the apron willprotect safety of operators. The cluth will automatically cut off whenwrongly processing or block.

11. The Automatic lubrication system & Tank in theapron and cross slide can automatically lubricate when operating.

12. 2 Speeds feed Talistock makes easily operation.

13. The bed rails 485 mm(19"), 65˚ makes morestability of heavy cutting.

14. Y-△ has small start-up current, can ease theburden of equipment and motor instant start.

We reverse the rightto modify and improve our products.