JK0220 两相驱动器

JK0220

两相混合式步进电机驱动器

2phase hybrid stepper motor driver

概述

JK0220 两相混合式步进电机驱动器，采用直流12~36V, 交流12~24V供电，适合驱动电压在直流12~36V,或交流12~24V，电流小于2.0A,外径在20mm~42mm的混合式步进电机使用。此驱动器采用交流伺服驱动器的电流环进行细分控制，电机低速运行平稳，几乎没有震动和噪音。广泛适合于各类CNC机械，机器人，点钞机行业。

Descriptions

JK0220 is a type of 2 phase hybrid steppermotor driver , this driver input voltage is 12~36V DC or 12~24V AC. suitfor input voltage both for 12~36V AC and12~24V DC, current less 2.0A, diameter from 20mm~42mm 2 phase hybrid stepper motor .this driver that adopts similarto the Circuit of servo control which enables the motor to run smoothly almostwithout noise and vibration. It iswidely used in CNC machine , robots, and money counting and machine.

特点

*平均电流控制，两相正弦电流输出

*直流12~36V,交流12~24V供电

*光电隔离信号输入、输出

*有过压­﹑欠压­﹑过流­﹑相间短路保护功能

*八档细分和自动半流功能

*八档输出相电流设置

*可驱动任何2.0A相电流以下两相、四相混合式步进电机
*20KHz斩波频率

Features

*Averagecurrent control,2 phase sinusoidal output current drive

*supplyvoltage from 12VDC~36VDC and 12VAC~24VAC

*Opto-isolatedsignal I/O

*Overvoltage,under voltage,overcurrent,phase short cicuit protection

*8channels subdivision and automatic idle-current reduction

*8channels output phase current setting

*Can drive 2 phase and 4phase hybrid stepper motor when phase current less than2.0A

*20KHzPMW.

性能指标

输入电压 直流12~36V, 交流12~24V

输出电流 0.3A~2.0A

温 度 工作温度-10°~45°，存放温度-20°~125°

环境湿度 不凝露，不结霜

气 体 禁止有可燃气体和导电灰尘

重 量 180克

MechanicalSpecification

Input Voltage 12~36V DC, 12~24V AC

Output current 0.3A~2.0A

Temperature working temperature -10°~45°,stockingtemperature ~20°~70°

Humidity Not condensation , no water droplets

Gas Prohibition of combustible gasesａnd conductive dust

Weight 180g

MechanicalDimension (mm)