JK3MD2207 三相步进电机驱动器

JK3MD2207

三相混合式数字步进电机驱动器

3phase digital hybrid stepper motor driver

概述

JK3MD2207 两相混合式步进电机驱动器，采用交流110V~220V，适合驱动电流小于7.0A,外径在110mm,130mm的三相混合式步进电机使用。电机低速运行平稳，高速力矩稳定。广泛适合于各类CNC机械，机器人，切割机，包装机，绘图仪，雕刻机等，

Descriptions

JK3MD2207 is a type of 2 phase hybrid steppermotor driver , this driver input voltage is 110V~220V AC . suit for currentless 7.0A, diameter is 110mm ,130mm 3 phase hybrid stepper motor . the motorrun smoothly. It is widely used in CNCmachine , robots,cutting machine,packing machine,plotter, engraving machine andso on.

特点

*交流110V~220V

*光电隔离信号输入、输出

*有过压­﹑欠压­﹑过流­﹑相间短路保护功能

*十六档细分和自动半流功能

*十六档输出相电流设置

*步进电机噪音，发热，共振等实现革命性突破

*主要适合驱动110mm和130mm两相步进电机

Features

*supplyvoltage from 110VAC~220VAC

*Opto-isolatedsignal I/O

*Overvoltage,under voltage,overcurrent,phase short cicuit protection

*16channels subdivision and automatic idle-current reduction

*16channels output phase current setting

*low noise ,low hot

*mainlyfor 110mm and 130mm 3 phase stepper motor

性能指标

输入电压 交流110V~220V

输出电流 1.3 A~7.0A

温 度 工作温度-10°~45°，存放温度-20°~125°

环境湿度 不凝露，不结霜

气 体 禁止有可燃气体和导电灰尘

重 量 2300克

MechanicalSpecification

Input Voltage 110~220V AC

Output current 1.3A~7.0A

Temperature working temperature -10°~45°,stockingtemperature ~20°~70°

Humidity Not condensation , no water droplets

Gas Prohibition of combustible gasesａnd conductive dust

Weight 2300g

MechanicalDimension (mm)