当前位置:西安伊德机械制造有限责任公司>>数控珩磨机>> EDHM25系列大孔径珩磨机|西安高性能珩磨机
EDHM25系列大孔径珩磨机|西安高性能珩磨机
■主轴往复运动采用液压伺服控制技术,往复速度可实现无级调速,响应速度快。
■主轴旋转运动采用变频电机驱动,可实现无级变速。
■珩磨砂条涨缩装置为液压双进给结构,采用液压比例控制技术或手动调压阀设定实现压力控制。
■液压系统采用变量泵,并采用强制冷却,保证液压油温度恒定。
■机床冷却系统为循环冷却,采用磁分式纸带过滤机两级过滤,并使用油冷机强制冷却。
■机床可配置在线自动测量系统以保证珩磨工件尺寸一致性。
■控制系统采用高性能运动控制器,配置TFT彩色液晶触控面板。专为珩磨加工定制的人机界面更具人性化。
■ Hydraulic servo technique control of position and speed is used for spindle reciprocation. Therefore infinite variable speed and quick response speed are realized.
■ The spindle is driven by a inverter motor; it rotates and outputs infinite variable speed.
■ Honing extension system is in hydraulic double-feed design, in which constant pressure control is ensured by use of proportionally controlled technique or manual set by pressure regulating vlave .
■ Variable pump is used in hydraulic unit. Forced cooling is supplied for hydraulic unit, which guarantees constant temperature oil.
■ Circulation cooling is used in the cooling system. Magnetic-separating two-stage paper filter ensures clean honing fluid. Forced cooling is supplied by oil cooler so that the honing fluid is always kept in optimum temperature.
■ The machine is equipped with an on-line metering and measuring system, which ensures consistency of honing tolerances.
■ The machine is controlled by high-performance motion controller with TFT liquid crystal color touch panel. The human-machine interface especially made for honing shows humanistic feature.
■集成式液压站,采用油冷机冷却方式,保证液压油温度恒定。
■ Integrated hydraulic station, cooling by oil cooler, ensure that the hydraulic oil temperature constant.
过滤机
■机床冷却系统为循环冷却,采用双油箱设计,磁分式纸带过滤机两级过滤,并使用油冷机强制冷却。
■ Machine tool cooling cycle cooling system, dual fuel tank design, magnetic tape filter two-stage filtration fraction, and an oil cooler forced cooling.
25夹具
■机床夹具采用下压油缸方式
■Down press type oil cylinder
通径伺服阀
■冲程往复控制采用液压伺服控制技术。
■ Stroke reciprocating control hydraulic servo control technology.
■机床采用自动上下料装置,降低劳动强度
■ The machine adopts automatic loading and unloading device, reduce labor intensity.
EDHM25系列大孔径珩磨机参数
项目 | EDHM25 | EDHM40 | ||
珩孔直径范围 | Φ150mm~Φ250mm | Φ250mm~Φ400mm | ||
主轴大往复行程 | 1250mm | 1950mm | ||
大珩孔深度 | 780mm | 1000mm | ||
主轴旋转方式 | 变频电机,配减速机 | |||
主轴转速范围 | 10-200r/min | |||
主轴往复形式 | 液压比例伺服控制、无级调速 | |||
主轴往复速度 | 2.5-20m/min | |||
珩磨头进给方式 | 液压比例定压双进给 | |||
粗精进给推杆大行程量 | 30mm | |||
工作台驱动方式 | 移动工作台 | |||
工作台工位数 | 2 | |||
工作台分度时间 | 7s | |||
工作台定位精度 | 0.05mm | |||
工作台尺寸 | 700X1400mm | |||
加工精度 | 圆柱度:≤0.02mm ,粗糙度:Ra0.2 μm | |||
电气控制系统 | 欧姆龙PLC,运动控制器 | |||
液压系统 | 双变量泵,配油冷机 | |||
冷却系统 | 分离水箱、磁辊纸带两级过滤恒温冷却系统、配油冷机 | |||
润滑系统 | 集中定量自动润滑 | |||
气动系统 | 标准气动控制系统,选配空气过滤装置 | |||
测量系统 | 国产量仪,加工过程中实现在线自动测量 | |||
珩磨头及珩磨连杆 | 双进给珩磨头,珩磨砂条涨缩压力分级可控 | |||
珩磨夹具 | 下压式油缸 | |||
夹具夹紧方式 | 端面下压 | |||
机床防护 | 半封闭式防护罩 | |||
工作灯 | 节能型机床工作灯 | |||
机床噪声 | <> | |||
机床颜色 | 机座:深灰色、其他:白色 | |||
机床总功率 | 35KVA | 40KVA | ||
机床净重 | 约9000KG | 约13000KG | ||
机床外形(长×宽×高) | 5000×4500×5800mm | 6000×5500×6500mm |
请输入账号
请输入密码
请输验证码
以上信息由企业自行提供,信息内容的真实性、准确性和合法性由相关企业负责,机床商务网对此不承担任何保证责任。
温馨提示:为规避购买风险,建议您在购买产品前务必确认供应商资质及产品质量。