ITEM | SL-120 |
Work Capacity | | Slide Gang Type | Turret Type |
Swing over bed | Ø 330 (Ø13) |
Swing over side | Ø 136 (Ø5.4) | Ø 135 (Ø5.3) |
Max. machining diameter × length | Ø 135 × 150 (Ø5.3 × 5.9) | Ø 128 × 130 (Ø5.0 × 5.1) |
Machine Body | Slant angle of bed | 45 ° |
Max. travel range of Z/X-axis | 230 / 230 (9.1 × 9.1) | 230 / 107 (9.1 ×4.2 ) |
Servo motor of Z/X-axis | 1.2 / 1.2 kW |
Rapid traverse rate of Z/X-axis | 30 / 30 m /min (1181 / 1181 ipm) |
Spindle | Diameter of spindle front bearing bore | Ø 80 (Ø 3.2) |
Diameter of spindle bore/Draw bar bore | Ø 45 / Ø 35 (Ø1.77 / Ø1.38) |
Spindle nose type | ASA A2-5 |
Taper of spindle bore | 1/20 |
Spindle motor | 7.5/11 kW (10/14.7 HP) |
Spindle speed | STD: 6000 rpm |
Diameter of chuck | STD: 6" hydraulic |
Tools Turret | Type | Slide Gang Type | Turret Type |
Tool capacity | 6 pcs | 8 pcs |
Tool shank post | 16 × 16 (5/8 × 5/8) | 16 × 16 (5/8 × 5/8) |
Boring diameter post | Ø 25 / 2 pcs (Ø1 / 2 pcs) | Ø 25 / 4 pcs (Ø1 / 4 pcs) |
Radial tool post | 16 × 16 (5/8 × 5/8) 1 pcs | - |
Axial tool post | 16 × 16 (5/8 × 5/8) 2 pcs | - |
Dual tool post | 16 × 16 (5/8 × 5/8) 1 pcs | - |
Hydraulic Tailstock | Quill diameter | - |
Tailstock travel | - |
Center type | - |
Quill taper | - |
Quill stroke | - |
Drive Motor | Coolant motor | 960 W |
Hydraulic motor | 745 W (1 HP) |
Chip conveyor motor | 215 W (1/4HP) |
Accuracy | Positioning (z/x) | ±0.005 |
Repeatability (z/x) | ±0.002 |
Miscellaneous | Power requirement | 208-220 Volts / 9 KVA / 50 Amps |
Height from floor to spindle center | 900 (35.4) |
Height from bed to spindle center | 255 (10) |
Floor area (W × D × H) | 2124 × 1188 × 1726 (84 × 47 × 68) |
Packing Dimension (W × D × H) | 2600 × 2300 × 1820 (102 × 91 × 72) |
Net weight (ind. chip conveyor) | 2250 kg (4950 Ibs) |
Gross weight (incl. chip conveyor) | 2400 kg (5280 Ibs) |
机床商务网
机床商务网