主要用途及特点： Z7032、Z7040台式钻铣床是一种多功能多用途机床。该机床除能完成一般钻削加工外，还能实现扩孔、铰孔、攻螺纹和铣削、镗削等多项工作。机床主轴变速范围大；主传动全部采用齿轮传动，配置有微量进给系统；机头可绕立柱作360度旋转并可上下升降，十字工作台可作纵横向精确位移。机床造型新颖，布局合理，体积小巧，操纵方便。适用于单件及小批量生产的机械加工车间、机修车间、模具制造、个体维修加工及装璜业使用。 | | |
| | 台式钻铣床(不带柜台) | (带柜台) |
Z7032 Z7040台式铣钻床技术参数
| 参 数 名 称 | Z7032 | Z7040 |
| zui大钻孔直径 | Φ32 | Φ40 |
| zui大立铣直径 | Φ20 | Φ20 |
| zui大端铣直径 | Φ80 | Φ80 |
| zui大攻丝直径 | M16 | M16 |
| 主轴行程 | 125 | 125 |
| 主轴孔莫氏锥度 | 3#(M) | 3#(M) |
| 主轴箱行程 | 400 | 400 |
| 主轴端面对工作台面的距离 | 400 | 400 |
| 主轴中心至立柱表面的距离(跨距) | 255 | 255 |
| 主轴变速级数 | 9 | 9 |
| 主轴转速范围 | 50-2000 | 50-2000 |
| 电机功率 | 1.1KW | 1.1KW |
| 工作台面积 | 650×220 | 650×280 |
| 工作台纵向行程 | 420 | 420 |
| 工作台横向行程 | 200 | 200 |
| 外形尺寸 (长×宽×高) | 1102×1123×1481 | 1102×1123×1481 |
| 重量 | 450kg | 470kg |
Z7032 Z7040 CYLINDRICAL BENCH TYPE DRILLING MACHINE Z7032 Z7040 cylindrical bench type drilling is a multifunctional and multipurpose machine tool with a new design. The machine has not only the use of drilling ,but also countering、reaming、tapping and milling、boring. The speed of the spindle is wide,the final transmission uses gear driving,and the micro feed system is equipped.The headpiece can rotate cylindricality and go up and down.The cross table can slide precisely along length and breadth. The machine has attractive appearance、rational distribution、small and exquisite volume、convenient control system. This machine applies to produce single or small serial parts in machine workshop、pattern shop、personal maintenance shop and decorate shop. Z7032 Z7040 MAIN SPECIFICATIONS
| name | ²) | 650×220 | 650×280 |
| 工作台纵向行程(mm) | 420 | 420 |
| 工作台横向行程(mm) | 200 | 200 |
| 外形尺寸 (长×宽×高)(mm3) | 1102×1123×1481 | 1102×1123×1481 |
| 重量(kg) | 450 | 470 |
