立式加工中心

MV-1375立式加工中心
机械特点

在主轴圆周设气幕吹净，防止切削入侵可保证轴承。（选配）
主轴前端环状横削，使加工物达到冷却效果。（选配）
主要机体皆采用箱型结构，保证机体*刚性与稳定性。
热交换器标准附件，散热效率佳，可降低故障率及延长内部电子元件的寿命。（选配电控箱空调）
使用镭射定位仪、循圆切削测试装置及主轴动平衡校正仪等来保证检验，以确保机器动态、静态与加工精度。
两侧横削系统搭配螺旋式除屑装置，可将切削排至前方之横屑箱内。
滑轨润滑点平均分配布置，采用容积式配油器，各注射点均等，确保滑动面润滑均匀。

Air curtain for blowing is set in the spindle circumferenc to prevent cutting invasion and ensure the bearing （optional）.
Ring balance cutting is conducted on the front end of the spondle to achieve the best cooling effect of workpieces （optional）.
Main body is box-structured to ensure the best rigidity and stability.
Heat exchangers are standard accessories,with good heat dissipation efficiency and the ability to reduce intentional rate and to extend the lift of the internal electronic components.（optional electric air conditioning）
Laser positioning system,circular cutting testing fixture and spindle balancing and calibration instrument are used to ensure the inspection as well as the machines dynamic,static and machining precision.
Cutting system on both sides are matched with screw-type chip removal device,and the chips can be removed to the chip removal box in the fornt.
Lubrication points on the slides are evenly distributed,adopting the displacement oil distributor.The injection points are equal to ensure a smooth and even lubrication surface.