700G DETACHABLE AUTO LOADERS
Features:
Single-phase vacuum absorption material in motor set time produce vacuum airflow through the plastic particles absorption material suction hopper ductules into in raw material, after getting into direct injection molding machine, the suction hopper reservoir in material action would continuous injection molding machine suction hopper and store until feeder hopper showed so far with material.
Stable and reliable performance
Suction feeder suction feeding time, absorb material action and suck material model selection of digital set and display is through the microcomputer CPU control. Has the breakdown self check and alarm function. All types of equipment are using high quality stainless steel materials, strictly in accordance with the industry standard manufacture, has stable and reliable performance.
Product features
The stainless steel structure
Suck material time setting from 0 to 99 seconds
Removing mixture time setting from 0 to 99 seconds
Using the new times reserved for proportional valve and clean material valve or broken material absorption type material box contacts
Fill material failure alarm interval or stop machine Settings
Spray cleaning function can be cleaned mesh, and can be set spray cleaning time and spray cleaning frequency
There are power, spray cleaning, low material place signal, fill material, full materials, fill material failure, vacuum motor load and indicator lights
Nonwoven fabric with stainless steel filters filter dust filter
Low noise vacuum carbon brush motor
The motor carbon brush the warning function wear
Motor overload protection alarm function
Raw material place by the magnetic induction reed switches, cooperate with material place gravity type stainless steel blanking dampers, do not need along with different raw materials and adjust
The installation of electronic parts. Symmetrical
Complying with CE safety standards of the circuit design
Host machine separated from the hopper, easy and safe to operate.
■Independent filter for easy cleaning.
■Stainless hopper.
■Microcomputer controlled.
■Alarm for overload and lack of material.
■High-speed rectificative motor of small footprint and strong suction force for new material for AL-700G.
■Induction high-pressure pump of low noise and long service time for AL-800G & AL-800G2.
■Reverse cleaning for AL-800G & AL-800G2.
■With CE authentication.
