德国 HASKEL 液压泵 dyz
德国 HASKEL 液压泵 dyz
压缩介质
Petroleum base oils, Kerosene, Diesel fuel, with 5% soluble oil.
Plain Water.
Most phosphate Ester base fire resistant hydraulic fluids:e.g., Pydraul, Lindol, Cellulube, Fyrquel, and Houghtosate 1120 and Petroleum base solvents compatible with UHMWPE (Ultrahigh Molecular Weight Polyethylene) dynamic, and Viton static seals.
Petroleum base solvents,e.g., Boron fuels, Aromatic hydrocarbons( Benzene ,Toluene Xylene, Hylene, etc.);Chlorinated solvents (Trichloroethylene, Carbon Tetrachloride,? Chlorobenzene ,etc.); Mecaptans, Dowtherm A, Fluoronated solents(Fluorobenzene, Fluorochloroethylene ,etc.); Dowtherm E, plus all of group 3 plus some mildly corrosive acids compatible with wetted materials.
See note (5A) for service with Methyl-Ethy-Ketone, Methyl Acetone, Diacetone, Alcohol and Freon 22Skydrol and Aerosafe hydraulic fluid. Acetone and some alcohols (Ethy, Methy and isopropyl).Also suitable for these fluid if viton static seals replaced with EPR, specify modification number 51331(no extra change),e.g..5133-MDTV-5.(Most Phosphate Estar base fluids solidify at approximately 206 MPa .)
Deionized water.
NOTE: a) Dynamic seal life with non-lubricating fluids will understandably be less than with lubricating type.
b) Consult factory for additional chemical resistance data.
HASKEL 1/3HP PUMP 【1/3马力（0.25Kw）haskel液体增压泵系列】
| 型号 | 序号 | 压缩比 （增压比） | 较高输出压力 | 排量/循环 | ||
| MODEL | RATIO DASH NO. | ACTUAL AREA RATIO | MAXIMUM RATED OUTPUT PRESSURE | DISPLACE MENT /CYCLE | ||
| CONTINUOUS (连续输出)MPa | INTERMITTENT （间歇输出）MPa | |||||
| M,MDTV,MDSTV | -5 | -5.6 | 4.3 | 4.3 | 0.83 | 13.6 |
| M, MS | -7 | 7.8 | 6.2 | 6.2 | 0.60 | 9.8 |
| -12 | 14 | 10.3 | 10.3 | 0.36 | 5.9 | |
| M,MS,MCPV, 29723 (1) | -21 | 25 | 17.9 | 17.9 | 0.20 | 3.3 |
| -36 | 41 | 31 | 31 | 0.12 | 2.0 | |
| -71 | 82 | 60.7 | 60.7 | .060 | 1.0 | |
| -110 | 126 | 93.1 | 93.1 | .039 | 0.6 | |
| M, MS (1) | -188 | 217 | 103.4 | 103.4 | .023 | 0.4 |
Maximum intermittent pressure for stainless steel in MS, 29723 and MCPV series pumps is 69MPa
2. 较高驱动气压力0.85MPa( Maximum drive pressure0.85MPa)
| 型号 | 服务介质 | 材质 | 非金属材质 | |
| MODE | SERVICES | WETTED MATERIALS | NON METALLICS | |
| 泵部分 PUMP SECTION | 活塞部分 PLUNGERS | |||
| M | [1] | Cad plated steel,luminum & SS | 416 SS | Urethane, PTEF,Buna |
| MS | [1][2] | All SS | 316 SS | UHMWPE, PTEE, Buna |
| MDTV | [1][3][5] | Separtion-Aluminum & SS | 416 SS | PTFE, Viton |
| MDSTV | [1][2][3][4][5] | Separtion - All SS | 416 SS | PTFE, Viton |
| MCPV | [1][2][3][4][5] | Separtion - All SS | 15.5PH SS | PTFE, Viton |
| 29723 | [1][2][3][5][6] | Separtion - All SS | Hard Chrome Plated 15.5PH SS + Dichronite | UHMWPE, PTFE, Ryton |
