Description	TK1070	TK1270	TK1500
Capacities
Swing over bed, mm	1070 (42”)	1270 (50”)	1500 (59”)
Swing over cross slide, mm	744 (29”)	944 (37”)	1100 (43”)
Swing over gap, mm	1520 (60”)	1720 (68”)	1950 (77”)
Between centers, mm	1700 / 2200 / 3200 / 4200 / 5200 / 6200 / 7200 / 8200 (70” / 87” / 126” / 165” / 205” / 244” / 283” / 323”)
Headstock
Spindle bore, mm	155 (6”) / 230 (9”) Opt. / 255 (10”) Opt.	155 (6”) 230 (9”) Opt. / 255 (10”) Opt. / 305 (12”) Opt.	155 (6”) / 230 (9”) Opt. / 255 (10”) Opt. / 305 (12”) Opt.
Spindle nose	A2-11 / A2-15 Opt.	A2-11 / A2-15 Opt. / A2-20 Opt.	A2-11 / A2-15 Opt. / A2-20 Opt.
Spindle speeds, rpm (steps)	5 ~ 615 / 4 ~ 430 (A2-15 Opt.) (18)	5 ~ 615 / 4 ~ 430 (A2-15 Opt.) / 2 ~ 390 (A2-20 Opt.) (18)	5 ~ 615 / 4 ~ 430 (A2-15 Opt.) / 2 ~3 90 (A2-20 Opt.) (18)
Spindle motor, HP	20, 25 (30 Opt.)
Threads
Lead screw	12 mm / pitch (2 TPI)
Metric / pitch, range	1 - 30 mm
Inch, range	1 ~ 30 TPI
Module / pitch, range)	0.5 - 15 M
DP, range (numbers)	2 ~ 60 TPI
Feeding range
Longitudinal feeds mm / rev.	0.07 - 2.03
Cross feeds, mm/rev.	0.028 - 0.81
Tailstock
Quill dia. / Center taper, mm	165 (6.5”) / MT6
Travel, mm	300 (12”)
Miscellaneous
Bed width, mm	625 (25”)
Cross slide travel, mm	700 (28”)
Compound rest travel, mm	380 (15”)
Coolant pump motor, HP	1/6
Gross weight, kgs	6600 / 7000 / 7800 / 8600 / 9200 / 10000 / 10800 / 11600	6900 / 7300 / 8100 / 8900 / 9700 / 10500 / 11300 / 12100	7400 / 7800 / 8600 / 9400 / 10200 / 11000 / 11800 / 12600