1.MC均为定寸研磨方式；任何相同规格之方型盘W,X,Y,Z各点之高度公差为0.05mm以内。
2.MC规格均可替换生爪，作不规则形状之加工，以替代中心机大量治具，更经济、方便。
3.硬爪重复夹持之精度公差为0.02mm以内。
4.侧边平行校正后，硬爪夹持之平行公差为0.05mm以内。
MC SQUARE SHUCKS
1.MC chucks are precisely ground,the tolerances of W,X,Y,Z among chucks are with in 0.05mm.
2.Soft jaws can be used alternatively for machining special shaped work pieces,to substitute for designing and making a lot of jings for this purpose.
3.The repetitive gripping accuracy with the hard jaws are with in 0.02mm.
4.Parallel gripping accuracy with hard jaws can be controlled with in 0.05mm after aligning sides of chucks.
规格 / Specification 单位/UNIT：mm
| 型式/规格 MODEL/SPEC | 外径夹持范围 O.D.Clamping Range mm | 内径夹持范围 I.D.Clamping Range mm | 净重 Weight kg |
|---|---|---|---|
| MC-06 | Ø4-Ø128 | Ø55-Ø128 | 11.4 |
| MC-08 | Ø5-Ø162 | Ø65-Ø162 | 18.6 |
| MC-10 | Ø6-Ø200 | Ø72-Ø200 | 31.6 |
| MC-12 | Ø10-Ø265 | Ø90-Ø265 | 56.6 |
| 型式/规格 MODEL/SPEC | A | B | C | D | E | F | G | H | J | K | L | M | N | P | Q | R | S |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MC-06 | 215 | 57 | 18 | 130 | 40 | 5.5 | 4-M10x1.5P | 68 | 26 | 39 | 14 | 144 | 165 | 144 | 165 | 66 | 18 |
| MC-08 | 250 | 65 | 20 | 160 | 55 | 6 | 4-M12x1.75P | 82 | 28 | 43 | 17 | 174 | 200 | 174 | 200 | 83 | 18 |
| MC-10 | 310 | 72 | 22 | 200 | 70 | 6 | 4-M14x2P | 93 | 32 | 50 | 21 | 218 | 250 | 218 | 250 | 104 | 18 |
| MC-12 | 380 | 82 | 25 | 260 | 100 | 7 | 4-M16x2P | 118 | 40 | 56 | 23 | 274 | 310 | 274 | 310 | 135 | 22 |
保留技术更改的权利,恕不另行通知 Subject to technology changes without prior information
非标需求可定做 Non-standard requirements can be made
