OUTPUT CHARACTERISTICS YLF
| Model | DX-532-LP | DX-532-HLP |
|---|---|---|
| Wavelength (nm) | 532 | |
| Power @ 40kHz | 35W | 48W |
| Power @ 200kHz | 25W | 40W |
| Pulse width @ 40kHz | ~85 | ~65 |
| Pulse width @ 2000kHz | ~340 | ~250 |
| Repetition Rate† | Single shot to 200kHz | |
| Pulse to pulse stability** | <1.5% rms | |
| Long Term Stability (8 hr ±1°C) | ± 2% rms | |
| Polarization Ratio | Vertical; 100:1 | |
| Beam diameter (at exit) | ~ 1mm | |
| Beam divergence | ~ 2 mrad | |
| Beam Circularity | >90% @ 40kHz | |
| Spatial mode | TEM00 M2 < 1.2 | |
| Beam pointing stability | < 25 μrad | |
OUTPUT CHARACTERISTICS YAG
| Model | DX-532-LP | DX-532-HLP |
|---|---|---|
| Electrical Requirement | 100-240 V | |
| Line Frequency | 50 to 60 Hz | |
| Interface | Ethernet / RS 232 / GUI / External TTL Triggering | |
| Power consumption (excluding chiller) | < 300 W typical | < 400 W typical |
| Warm up time | < 15 min from stａnd by, < 30 min from cold start | |
| Relative Humidity | Non-condensing, 90% Max | |
| Ambient Temperature | 15°C to 35°C (59° to 95°F) Operating Range | |
| Storage Condition | -10°C to 40°C; Sea Level to 12,000 m; 0% to 90% RH, non-condensing | |
| Model | DX-532-LP | DX-532-HLP |
|---|---|---|
| Laser Dimension (W X H X L) | 7.5 in x 3.75 in x 22.5 in | 7.5 in x 3.75 in x 25 in |
| Weight | 49 lbs | |
Long Pulse Green Laser
DX-532-LP | DX-532-HLP
Features
- Long pulse width – up to ~340ns @ 200kHz
- Power up to 48W
- Patented intracavity Green generation
- Compact, rugged, monolithic all-in-one industrial grade ns laser
- Total pulse control
- TEM00 beam with roundness >90%
- Repetition rates from single shot to 200 kHz
