| ▶ | 本給油機可配合機械軟體使用，設有油位裝置及壓力過載安全保護裝置。可警示油箱的油位及管路壓力。 注意事項：請使用新油，勿使用回收油，以免雜物阻塞濾油網及管路，影響機械使用壽命。濾油網請定時清洗（約3~5個月）。 |
| ▶ | This oil feeder is capable of working with the software of the machine and equipped with pressure overload protecting device and oil shortage of the tank and the oil pipe pressure switch warning system. Do not use recycled or recovered oil to avoid blocking the oil pipe or filter that will shorten the durability of the machine and periodically clean the filter once every 3-5 months. |
| TYPE | TK-1203 | TK-1203A | TK-1203E | TK-1203AE | |||
| 流量 Max.Flow | 180cc/min | 180cc/min | 180cc/min | 180cc/min | |||
| 壓力 Pressure | 5~15kg/c㎡ | 5~15kg/c㎡ | 12~15kg/c㎡ | 12~15kg/c㎡ | |||
| 浮球開關 Float Swith | ● | ● | ● | ● | |||
| 油箱容量 Oil Tank Capacity | 3L . 4L . 8L | ||||||
| 管路壓力訊號裝置 Oil Pipe Pressure Signal | 選配 Take Your Choice | ||||||
| 釋壓保護裝置 Pressure Protection Device | ● | ● | ● | ● | |||
| 潤滑時間 Lubricating Timing (min) | 1-120秒 (sec) | 1-120秒 (sec) | |||||
| 間歇時間 Intermittent Timing (min) | 1-180分 (min) | 1-180分 (min) | |||||
| 電壓 Voltage (50/60Hz) Single Phase | 110v or 200v 單相 | 110v or 200v 單相 | 110v or 200v 單相 | 110v or 200v 單相 | |||
| 馬達出力功訊率 Consumption Power | 20W | 20W | 20W | 20W | |||
| 脫壓裝置 (E) Pressure Relief Divice | ● | ● | |||||
| 接頭口徑 Joint Dia | 4Φ or 6Φ | 4Φ or 6Φ | 4Φ or 6Φ | 4Φ or 6Φ | |||
| ※備註 (Remark) | 配合比例式分油座使用 Use Proportional Oil Distribution | 配合容積式分油座使用 Use Content Type Oil Distribution | |||||
