Tailstock
Turning long shaft work-piece with tailstock and hydraulic quill to support the work-piece.
| Capacity | |
|---|---|
| Swing over bed | φ 590 mm |
| Swing over carriage | φ 380 mm |
| Distance between centers | 580mm |
| Max. turning diameter | φ 450 mm |
| Stroke | |
| X - axis | 245 mm ( 230 + 20 ) |
| Z - axis | 520 mm |
| Spindle | |
| Speed | 2200 rpm |
| Spindle nose | A2 - 8 |
| Spindle bore | φ 91 mm |
| Chuck | 10" ( φ 80 mm ) |
| Turret | |
| tools | Vertical 10 - station Servo turret |
| OD tool shank | □ 25 mm |
| ID tool shank ( Max. ) | φ 40 mm |
| Feed traverse | |
| X - axis | 16m / min |
| Z - axis | 20m / min |
| Tailstock | |
| Tailstock stroke | 480 mm |
| Quill diameter | 75 mm |
| Quill tpaer | MT # 4 |
| Quill stroke | 100 mm |
| Motor | |
| Main motor (30 min.) | 25 HP ( βiIP 30 ) |
| Servo motor | X axis : 2.4 HP ( βiS 12 ) Z axis : 3.4 HP ( βiS 22 ) |
| Hydraulic unit motor | 2 HP |
| Coolant pump motor | 1 HP |
| Machine dimension | |
| Length of machine | 3455 mm |
| Width of machine | 1770 mm |
| Height of machine | 2000 mm |
| Weight of machine | 3500 kgs |
- Specifications are subject to change without notice.
Standard equipment & accessories
- 0i-MateTD controller
- Hydraulic system
- Hollow 3 - jaw hydraulic chuck
- Hard jaw & soft jaw 1 SET / each
- V10 servo turret
- Boring bar holder 5 PCS
- Facing tool holder 2 PCS
- Boring bar socket ( M10, 12, 16, 20, 25, 32 ) 2 PCS / each
- Drill socket ( MT # 2, # 3 ) 1 PC / each
- Moving door & splash guard
- Coolant system with high power coolant pump
- Cool tank
- Chip conveyor & chip bucket
- For CL - 220 / CL - 250 : Manual tailstock with hydraulic quill, living center MT # 4
- For CL - 280 : Programmable tailstock with built-in center and hydraulic guill, dead centerMT # 4
- Work light
- Tool box & adjusting tool
Optional equipment & accessories
- Manual tool preset
- Auto door
- Oil skimmer ( Disc - type )
- Transformer
- Voltage regulator with Transformer
- CE Approval specification
- Parts catcher
Controller & Panel
With FANUC controller 0iMateTD , 8.4" color LCD, new type control panel.
Turret
Vertical 10 - station servo turret with FANUC servo motorto index. Tool index quickly and it doesn't need another servo amp.
Box way
Box way structure for heavy duty cutting.Z axis with shear block safety coupling to prevent any accident.
Chuck
CL - 220 with 8 inch hollow 3 - jaw hydraulic chuck, bar capacity 52 mm .CL - 250 with 10 inch hollow 3 - jaw hydraulic chuck, bar capacity 80 mm .CL - 280 with 10 / 12 inch hollow 3 - jaw hydraulic chuck, bar capacity 80 mm .
