MCV 1170, 1270, 1370, 1470, 1475
MCV model MCV 1170, 1270, 1370, 1470, 1475, Series vertical machining center; 45 mm four sliding table and linear guide ways on Y axis, providing heavy loading capability. These models are specially customized processing of middle-large scale components and parts. It is suitable for the parts processing with high precision, such as milling, drilling, tapping and mold finishing. Key facility in industries of general machinery, car parts, aviation and mold makers.
| MCV 1170 | MCV 1270 | MCV 1370 | MCV 1470 | MCV 1475 | |
|---|---|---|---|---|---|
| Table Size | 1300 x 660 mm | 1400 x 660 mm | 1400 x 660 mm | 1600 x 660 mm | 1600 x 660 mm |
| X-Axis Travel | 1100 mm | 1200 mm | 1300 mm | 1400 mm | 1400 mm |
| Y-Axis Travel | 700 (750) mm | 700 (750) mm | 700 (750) mm | 700 mm | 750 mm |
| Z-Axis Travel | 700 mm | 700 mm | 700 mm | 700 mm | 700 mm |
Features
- Meehanite cast iron.
- Mitsubishi M 70A series Controller. 8.4“ LCD screen.
- 45mm*2 linear guide ways base on three axes.
- Y axis 35mm*2 linear + 2 box way support (MCV 1070)
- BT-40 Precision spindle taper.
- 10.000rpm belt drive rigid spindle.
- 7.5/11KW Spindle Motor
- 2, 2, 3.5 KW X, Y, Z Axis Servo Motors Rate
- 36,36,24M/min rapid travers on X, Y, Z axis.
- φ40,40,40 X, Y, Z Axis Ball Screw Diameter
- P4 Class bearings.
- Directly connected ball screw and AC servo motors.
- 24 tools Arm type ATC.
- Screw Type Chip Conveyor
Technical Details
|
|
-Mitsubishi M720
-Fanuc OIMD Alpha/ Beta
-Heidenhain ITNC 530
Spindle;
-BT 30 20.000rpm Buildin Motor
-BT 40 12.000rpm Direct Drive
-BT 40 15.000rpm Direct Drive
-BT 50 10.000rpm Direct Drive
-BT 50 6.000rpm Two Step Gear Box
Mitsubishi 15/18.5 KW Spindle Motor Option
Coolant Through Spindle 20 Bar (CTS)
-Paper Filter and Water Tank
Air Through Spindle (ATS)
Inner Water Flushing System with Water Pressure Pump
Spindle Jet Coolant Around Spindle
Link Type Chip Conveyor
Linear Guide Way Z Axis
-Piston Supported Z axis
Counter- balance Weight System
