DESCRIPTION
•Better performance than conventional lathes
•3-step speeds, each in variable speed change
•Speed change by auto shifting
•More convenient turning processing control & spindle speed shown on rpm meter
•Braking controlled by quick inverter stop
•Through cross feeding at fixed spindle speed, you´ll get the fine accuracy & speed for slide face of round plate (similar to CSS function)
•Through cross feeding for step turning, the spindle speed change can match and achieve rapid effect
| Description/MODEL | Unit | MA-2540(i) | MA-2560(i) | MA-2580(i) | MA-25120(i) | ||
| CAPACITY |
|
| |||||
| Center height | mm | 315 | |||||
| Swing over bed | mm | 630 | |||||
| Swing over gap | mm | 810 (opt.) | |||||
| Swing over cross slide | mm | 450 | |||||
| Distance between center | mm | 1000 | 1500 | 2000 | 3000 | ||
| Bed width | mm | 350 | |||||
| SPINDLE |
|
| |||||
| Spindle bore | mm | Ø85 (3”) | Ø105 (4”)opt. | Ø155 (6”) opt. | |||
| Spindle nose | - | D1-8 | A1-11 | A2-11 | |||
| Spindle speeds 18 steps | rpm | 25~1545 | 23~1293 | 13~690 | |||
| Inverter type (Variable speeds) | H: 491~2250 M: 126~490 L: 27~125 | H: 331~1500 M: 93~330 L: 20~92 | H: 176~800 M: 53~175 L: 10~52 | ||||
| TRAVEL |
|
| |||||
| Gross slide travel | mm | 330 | |||||
| Compound rest travel | mm | 150 | |||||
| TAILSTOCK |
|
| |||||
| Tailstock spindle dia. | mm | 75 | |||||
| Tailstock spindle travel | mm | 170 | |||||
| Tailstock spindle taper | - | MT#5 | |||||
| THREADS |
|
| |||||
| Lead screw | - | 4 TPI or 6 mm/pitch Ø35 | |||||
| Metric pitch threads | - | 0.5-7 mm/pitch (24 kinds) | |||||
| Inch pitch threads | - | 4-56 TPI (36 kinds) | |||||
| Module pitch threads | - | 0.25 - 3.5 M (16 kinds) | |||||
| DP threads | - | 8 - 112 P (36 kinds) | |||||
| FDDEING RANGE |
|
| |||||
| Range of longitudinal feeds | mm/rev. | 0.06 - 0.88 | |||||
| Range of cross feeds | mm/rev. | 0.03 - 0.44 | |||||
| MOTOR |
|
| |||||
| Main spindle motor | HP | 10 / 15 (opt.) | |||||
| Coolant pump motor | HP | 1/8 | |||||
| WEIGHT |
|
| |||||
| Net Weight | kg | 2300 | 2550 | 2700 | 2800 | ||
Note:
We have the right tomodify the specification or designs. If there are subjected to change without
prior notice.
MA-2500(i) Series
ACCESSORIES
| STANDARD ACCESSORIES |
| OPTIONAL ACCESSORIES |
| l Main drive motor | l CE conformity | |
| l Coolant equipment | l Electromagnetic brakes | |
| l 4-way tool post | l Gap bed | |
| l Tail stock | l Z-axis rapid travel | |
| l Center sleeve | l Digital Readout System | |
| l Dead Center | l 3-Jaw scroll chuck | |
| l Tool box & tools | l 4-jaw independent chuck | |
| l Independent Electrical Box | l Double chuck system | |
| l Operation & Service Manual | l Rear chuck adaptor | |
|
| l Face plate | |
|
| l Quick change tool post | |
|
|
| l Taper attachment |
|
|
| l Full length splash guard |
|
|
| l Chuck guard |
|
|
| l Chip and coolant shield |
|
|
| l Leadscrew guard |
|
|
| l Work light |
|
|
| l Steady rest |
|
|
| l Follow rest |
|
|
| l Micro-meter bed stopper |
|
|
| l Turret type 5-position bed stopper |
|
|
| l Rotating center |
