| Description | TNC460 / 460L | TNC460A |
| Capacity | ||
| Swing over Bed | 460 mm (18") | 460 mm (18") |
| Swing over cross slide | 240 mm (9.4") | 240 mm (9.4") |
| Center height | 230 mm (9") | 230 mm (9") |
| Distance between center | 1000 mm (40"), 1500 mm (60") | 1000 mm (40") |
| Bed width | 350mm (13.8") | 350mm (13.8") |
| Spindle | ||
| Spindle nose | A1-6 or D1-6 | A1-6 |
| Spindle speed (4 steps) | H1:961-2500 rpm H2:341-960 rpm L1:131-340 rpm L2:50-130 rpm | 2 steps H:341-2500 rpm L:50-340 rpm |
| Spindle bore | 52 mm (2.1") | 52 mm (2") |
| Chuck size | 8" (OPT) | 8" |
| Turret | ||
| Longitudinal travel (Z axis) | 895 mm (35.2"),1415 mm (55.7") | 890 mm (35.2") |
| Cross slide travel (X axis) | 280 mm (11") | 280 mm (11") |
| Cross slide width | 220 mm (8.6") | 220 mm (8.6") |
| Size of toolpost shank | 25 mm x 25 mm (1"x1") | 25 mm x 25 mm (1"x1") |
| X axis rapid travel | 5 M / min. (200 ipm) | 5 M / min. (200 ipm) |
| Z axis rapid travel | 10 M / min. (400 ipm) | 10 M / min. (400 ipm) |
| Tailstock | ||
| Tailstock diameter | 65 mm (2.5") | 65 mm (2.5") |
| Tailstock travel | 150 mm (6") | 150 mm (6") |
| Tailstock taper | MT5 | MT5 |
*The Specifications are subject to change without prior notice.
Work Range
TNC460 / 460A / 460L / 530
| Model | A1 | B1 | C1 |
| TNC460/460A/560 | 940 (37") | 835 (32.8") | 805 (31.7") |
| TNC460L/530L | 1440 (56.7") | 1335 (52.6") | 1305 (51.4") |
Dimension
TNC460 / 460A / 530
| Model | A | B | C |
| TNC460/460A | 2190 (86.2") | 1280 (50.4") | 1900 (74.8") |
| TNC460L | 2710 (106.7”) | 1280 (50.4”) | 1900 (74.8”) |
| TNC530 | 2190 (86.2”) | 1380 (52.7”) | 1935 (76.2”) |
| TNC530L | 2710 (106.7”) | 1380 (52.7”) | 1935 (76.2”) |
Spindel Torque- Power Diagram
(with FANUC Motor)
TNC460 FANUC βil8/10000
| speed [min-1] | Torque [Nm] | ||||||||||
| S1 | S2 | S3 | S4 | S5 | T1 | T2 | T3 | T4 | T5 | T6 | |
| Motor | 1500 | 2000 | 4500 | 6000 | 10000 | 19 | 35 | 40 | 48 | 59 | 80 |
| Spindle L2 i=0.026 | 39 | 52 | 117 | 156 | 260 | 753 | 1376 | 1546 | 1846 | 2300 | 3092 |
| Spindle L1 i=0.067 | 101 | 134 | 302 | 402 | 670 | 292 | 534 | 600 | 716 | 892 | 1194 |
| Spindle H2 i=0.192 | 288 | 384 | 864 | 1152 | 1920 | 102 | 186 | 209 | 250 | 311 | 418 |
| Spindle H1 i=0.498 | 747 | 996 | 2241 | 2988 | 4980 | 39 | 71 | 80 | 96 | 119 | 161 |
Standard Accessories
- Auto lubrication and coolant system
- Fagor spindle motor (Only for TNC460A)
- Auto 2 steps speed change (Only for TNC460A)
- 8" 3-jaw manual chuck (Only for TNC460A)
- 4 stations electric turret (Only for TNC460A)
- Work light
- Spindle sleeve
- Two dead centers
- Tool box with tools
- Manuals
Options
- Extra spindle bore and motor
- Hydraulic / manual chuck
- Face plate
- Steady rest
- Follow rest
- Rotation center
- Hydraulic tailstock
- 4 position manual tool post)
- Quick change toolpost
- 4 stations electric turret
- 8 stations hydraulic turret
- Chip conveyor
- CE mark
- Transformer
