A total of 18 tools (6 of them powered) is designed to work on complex work pieces.
TOOLING SYSTEM
Simultaneous machining is possible from the outside as well as from the inside. Depending on the work piece, the working time can be reduced up to 50%.
Gangtry tooling system
I-42 PLUS
Axial view
i-42 PLUS B
Axial view
i-42 PLUS
Axial view
i-42 PLUS M
Specification
| Machine Type | I-42PLUS | |||||
| Mitsubishi Controller | M80 | |||||
Spindle Capacity | Max. Turning Dia. | 100mm | ||||
| Max. Bar Working Dia. | 42mm (65mm) | |||||
| Max. Turning Length | 230mm | |||||
| Collet Chuck Type | KK5-173E42B (KK6-185E60B) | |||||
| Spindle Nose | A2-5 (A2-6) | |||||
| Spindle Bore | 43mm (66mm) | |||||
| Max. RPM. | 4000rpm (6000rpm) | |||||
Sub-spindle Capacity | Max. Turning Dia. | ---- | ||||
| Max. Bar Working Dia. | ---- | |||||
| Max. Turning Length | ---- | |||||
| Collet Chuck Type | ---- | |||||
| Spindle Nose | ---- | |||||
| Spindle Bore | ---- | |||||
| Max. RPM. | ---- | |||||
| C Axis | Least Commａnd Unit | 0.001° | ||||
| Positioning Accuracy | 0.02° | |||||
| Travel&Feed | X1/Y1/Z1 axis | 150 / 410 / 250mm | ||||
| X2/Y2/Z2 axis | 250 / ---- / 320mm | |||||
| Rapid Feed | 30m/min | |||||
| Repeated Positioning Accuracy | 0.005mm | |||||
| Motor | Main-Spindle | Servo Spindle 7.5kw (11.0kw) | ||||
| Sub-Spindle | ---- | |||||
| X1/Y1/Z1 axis | AC Servo 1.0 / 1.5 / 1.5kw | |||||
| X2/Y2/Z2 axis | AC Servo 1.0 / ---- / 1.0kw | |||||
| Motorized Tool | AC Servo 1.5kw | |||||
A.T.C System | OD/ID Tools Main Spindle | I-42 Plus | I-42 Plus M | I-42 Plus B | ||
| 11 / 9 | 6 / 5 | 6 / 5 | ||||
| OD/ID Tools Main Spindle | --- / 4 (Tail) | |||||
| Tool Shank Size | □ 20mm | |||||
| Drill Holder Size (Main) | ER-20 / Ø20mm | |||||
| Drill Holder Size (Sub) | ER-20 / Ø25mm | |||||
Motorized Tool | Number of Motorized Tools | I-42 Plus | I-42 Plus M | I-42 Plus B | ||
| 0 | 6 | 12 | ||||
| B axis | ( 360° ) | |||||
| Max. RPM. | 4000rpm | |||||
| Collet Specification | ER-20 | |||||
| Max. Drilling Dia. | 12.0mm | |||||
| Max. Tapping Capacity | M10xP1.5 | |||||
Hydraulic System | Hydraulic Pump / Tank Capacity | 1HP / 40L | ||||
Max. Pressure / Flow | 30 kg/cm² / 12L/min | |||||
| Lubrication | Lubricant Pump / Tank Capacity | 25W / 2L | ||||
| Max. Pressure | 15 kg/cm² | |||||
Coolant System | Coolant Pump | TPH4T5K, 5Bar, 75 L/min | ||||
| Hydraulic Pump | ---- | |||||
Coolant Tank Capacity | 125L | |||||
Machine Size | Length/ Width/ Height | 3200 (2500) / 1750 / 1950mm | ||||
| Weight | 4780kg | |||||
| ( ) Option | ||||||
