本机采用铸钢或钢板机身，全液压传动，水平调整，触摸屏显示快、慢速行程数据，自动润滑装置。工件在加工过程单机半自动或全自动连线，触摸屏调整参数，具有半自动双手安全按钮控制和连线自动运行功能。
The machine adopts cast steel body, fullhydraulic transmission, horizontal adjustment, touch screen display fast andslow travel data, automatic lubrication device. In the process of workpieceprocessing, single machine semi-automatic or full-automatic connection, touchscreen to adjust parameters, with semi-automatic two hａnd safety button controlａnd automatic operation function of connection.
| 液压驱动油缸 Hydraulic drive cylinder | 1 |
| 液压系统功率 Hydraulic System Power | 扩口/Rim Flaring:ABB 37Kw |
| 扩张/Rim Expander:ABB 45Kw | |
| 轮辋直径 Wheel Rim Diameter | 18～26 Inch |
| 轮辋厚度 Wheel Rim Max.Thickness | 8mm |
| 轮辋宽度 Wheel Rim Max. Width | 11.75 Inch |
| 工作效率 Work Efficiency | 100～200Pcs/h |
| 控制方式 Control Mode | PLC |
设备结构简介
Structure Description
该设备为卧式结构（见结构示意图），左侧模芯部分固定，右侧芯模在圆柱直线导轨导向下随油缸左右往返运动。左右两侧通过上下拉板形成封闭结构，很大程度上增加了设备的刚性和精度。油缸以前法兰形式固定于右侧固定座，通过推动中间移动部件完成轮辋扩口功能。
The equipment has horizontal structure (like structure sketch). The left tooling is fixed, while the right one can be guided by cylindrical linear guide way to move to left or right side with oil cylinder. The left and right sides are formed in enclosed structure through upper and lower pulling plates, which much increase rigidity and accuracy. The oil cylinder is fixed on right fix seat in form of front flange and finishes rim flaring operation by the means of pushing middle movable part.
当工件在滚道连线中滚动到位后，右侧模芯在油缸的推动下快速接近工件，到达工作位置时油缸改为工进速度，此时模芯自动定位中心且开始扩口工作，工进到位时接近开关或压力传感器发讯，油缸开始返程，接近开关检测到达位置发出信号，油缸复位，完成一次加工循环任务。
When the workpiece in slide way rolls to the target place, right tooling will be driven by oil cylinder to quickly approach to workpiece. When it gets to the working position, oil cylinder will change to feeding speed, tooling will automatically locate to central and start flaring. When feeding in the place, the proximity switch or pressure sensor will transmit signal, oil cylinder will start return, proximity switch will transmit signal when it detects that get to the target place, oil cylinder will back to home position. A processing circle mission is finished.
本机由主机、液压传动装置和电器控制装置三个部分组成，主机包括：机身、扩口模具；液压传动装置包括油箱、油泵—电机组、集成阀等；电气装置包括电气控制操纵箱等。主机和液压传动装置安装在混凝土基础上，由膨胀螺栓固定，电气箱固定在机身后侧。
This equipment consists of three parts: host machine, hydraulic driving device and electrical control device. The host machine includes lathe bed, flaring tooling; hydraulic driving device includes oil tank, oil pump-motor group, pile-up valve, etc.; electrical device includes electrical control cabinet, etc. The host machine and hydraulic driving device is installed on concrete foundation, fixed by expansion bolts. The electrical cabinet is fixed on the back side of lathe bed.
