单位 | J21S-16 | J21S-25 | J21S-40 | J21S-63 | J21S-80 | J21S-100 | ||
滑块公称压力nominal pressurre | KN | 160 | 250 | 400 | 630 | 800 | 1000 | |
公称压力行程nominal pressure stroke | mm | 5 | 5 | 6 | 6 | 8 | 10 | |
滑块行程slipper stroke | mm | 60 | 70 | 100 | 110 | 115 | 130 | |
滑块行程次数slipper stroke times | min-1 | 100 | 70 | 55 | 50 | 45 | 45 | |
封闭高度 max closing height | mm | 170 | 200 | 300 | 330 | 380 | 380 | |
封闭高度调节connecting rod adjuster | mm | 40 | 60 | 70 | 80 | 80 | 80 | |
滑块中心至机身距离distance between sliper centre and machine | mm | 500-700 | 500-700 | 500-700 | 500-700 | 500-700 | 500-700 | |
工作台尺寸work bench dimension | 前后frot &back | mm | 320 | 330 | 400 | 450 | 540 | 600 |
左右left & right | mm | 490 | 530 | 650 | 720 | 820 | 900 | |
工作台落料尺寸diameter of blank –holding hole | 前后frot &back | mm | 150 | 160 | 280 | 140 | 250 | 250 |
左右left & right | mm | 200 | 220 | 200 | 280 | 140 | 340 | |
直径Diameter | mm | 180 | 200 | 220 | 200 | 290 | 290 | |
滑块地面尺寸dlipper underside hole | 前后frot &back | mm | 140 | 170 | 230 | 220 | 250 | 360 |
左右left & right | mm | 180 | 230 | 260 | 300 | 320 | 320 | |
模柄孔尺寸size of die handle bore | 直径Diameter | mm | 35 | 40 | 50 | 60 | 60 | 60 |
深度 depth | mm | 60 | 60 | 70 | 70 | 80 | 80 | |
机身立柱间距离pole distance | mm | 160 | 240 | 300 | 320 | 300 | 300 | |
工作台至导轨距离distance betwwen bench to guideway | mm | 250 | 280 | 390 | 440 | 490 | 490 | |
垫板厚度thickness of spacer | mm | 50 | 50 | 80 | 80 | 90 | 95 | |
机身可倾角angle of spacer | ° | / | / | / | / | / | / | |
电机motor Power | 功率power | KW | 1.5 | 2.2 | 3 | 4 | 7.5 | 7.5 |
转速round speed | 转/min | 960 | 1420 |