以下不是表格形式
o Dual Electronic hａnd wheels for manual control.
o 2-3/8” Spindle bore.
Hardened and precision ground bed-ways.
o 3-bearing spindle support.
o Easy access chip removal.
o 40Mb Hard Drive – For Internal Program Storage.
o Flash Memory – For External Program Storage and Transfer.
o Tool Page / 99 Tools - You Can Specify Tool Radius, Length & Wear Offsets. Provides a Graphical Tool.
STANDARD EQUIPMENT:
o 6-station automatic tool post. 六工位自动刀架
o Automatic lubrication system. 自动润滑
o Coolant system. 冷却系统
o 10” 3-jaw chuck. 250MM 爪卡盘
o Work light. 工作灯
o Dead center. 呆
o Live center. 活
o Toolbox and tools. 工具机
SPECIFICATIONS:
o Swing over Bed: 16". 回转直径 400MM
o Swing over Cross Slide: 8". 拖板回转直径 200MM
o Swing Through Gap: 25-7/8. 马鞍回转直径 650MM
o Distance Between Centers :40". 两距 1000MM
o Spindle Bore: 2-3/8". 主轴通孔60MM
o Spindle Nose: D1-6. 主轴端口D1-6
o Spindle Taper W/ Sleeve: MT#6. 主轴锥度MT#6
o Number of Spindle speeds: Variable. 主轴转速方式 变频
o Range of Spindle Speeds (RPM): 150 - 2000. 转速系列150-2000
o Range of Longitudinal Feeds (IPR): 320in/min. 纵向进给 320in/min
o Range of Cross Feeds (IPR): 240in/min. 横向进给 240in/min
o Cross Slide Travel: 9". 横向行程 228MM
o Carriage Travel: 35". 拖板行程 889MM
o Tailstock Spindle Travel: 5". 尾架套筒行程 125MM
o Taper in Tailstock Spindle: MT#4. 尾架锥度 MT#4
o Steady Rest Capacity (in.): 3/8 to 7. 中心架
o Width of Bed : 13". 床身宽度
o Motor: 10HP, 220V/440V, 3Ph, prewired 220V. 电机
o One piece cast iron base. 铸铁底座
o Overall Dimensions: 114"x 60" x 77". 外形尺寸
o Net Weight: 3870 LBS. 净重
o Shipping weight: 4200 LBS. 毛重
o Dual Electronic hａnd wheels for manual control.
o 2-3/8” Spindle bore.
Hardened and precision ground bed-ways.
o 3-bearing spindle support.
o Easy access chip removal.
o 40Mb Hard Drive – For Internal Program Storage.
o Flash Memory – For External Program Storage and Transfer.
o Tool Page / 99 Tools - You Can Specify Tool Radius, Length & Wear Offsets. Provides a Graphical Tool.
STANDARD EQUIPMENT:
o 6-station automatic tool post. 六工位自动刀架
o Automatic lubrication system. 自动润滑
o Coolant system. 冷却系统
o 10” 3-jaw chuck. 250MM 爪卡盘
o Work light. 工作灯
o Dead center. 呆
o Live center. 活
o Toolbox and tools. 工具机
SPECIFICATIONS:
o Swing over Bed: 16". 回转直径 400MM
o Swing over Cross Slide: 8". 拖板回转直径 200MM
o Swing Through Gap: 25-7/8. 马鞍回转直径 650MM
o Distance Between Centers :40". 两距 1000MM
o Spindle Bore: 2-3/8". 主轴通孔60MM
o Spindle Nose: D1-6. 主轴端口D1-6
o Spindle Taper W/ Sleeve: MT#6. 主轴锥度MT#6
o Number of Spindle speeds: Variable. 主轴转速方式 变频
o Range of Spindle Speeds (RPM): 150 - 2000. 转速系列150-2000
o Range of Longitudinal Feeds (IPR): 320in/min. 纵向进给 320in/min
o Range of Cross Feeds (IPR): 240in/min. 横向进给 240in/min
o Cross Slide Travel: 9". 横向行程 228MM
o Carriage Travel: 35". 拖板行程 889MM
o Tailstock Spindle Travel: 5". 尾架套筒行程 125MM
o Taper in Tailstock Spindle: MT#4. 尾架锥度 MT#4
o Steady Rest Capacity (in.): 3/8 to 7. 中心架
o Width of Bed : 13". 床身宽度
o Motor: 10HP, 220V/440V, 3Ph, prewired 220V. 电机
o One piece cast iron base. 铸铁底座
o Overall Dimensions: 114"x 60" x 77". 外形尺寸
o Net Weight: 3870 LBS. 净重
o Shipping weight: 4200 LBS. 毛重
