产品概述
公司采用内镀法生产的高精度滚轮，可以制作R0.1 小圆弧面、小于1mm 齿距的多齿复杂型面滚轮及高径比大于1.5、高度大于200mm 的强力磨削用大型面滚轮，产品轮廓精度高，是高精度、高效成形磨削的修整工具。
公司采用外镀法生产的各类滚轮，用于陶瓷CBN 砂轮、内圆磨头的修整，具有修整效率高、直线度好等特点。
Product overview
We can produce high precision dressing rollers with inner galvanizing (UZ) methods. For example, we can supply complica-ted multi-teeth rollers with small radius R0.1 and teeth distance less than 1mm and heavy grinding rollers with height more than 200mm and height diameter ratio bigger than 1.5.
Our dressing rollers produced with outer galvanizing methods are used for dressing vitrified CBN grinding wheels and int-ernal mounted points. Its features are high dressing efficiency and good straightness.
主要特点
修整效率高
型面一致性好
加工的工件质量稳定
Main features
High dressing efficiency
Good profile consistency
Stable workpiece quality
应用领域与适用范围
广泛应用方向器螺杆、万向节、气门、轴承内外圈，凸轮轴、曲轴、连杆等诸多产品加工砂轮的修整。
Application
They are widely used for dressing the grinding wheels for processing screw of steering gear, universal joint, valve, bearing inner and outer raceway, camshaft, crankshaft and connecting rods and so on.
