1、特殊的夹具可研磨0.8~26mm的钻头，只需要用一个夹具便可夹持所有尺寸，一次完成，不需要因为欲研钻头大小而购买一大堆大大小小的弹性夹头来更换，也不必寻找量尺来测量所研磨的钻头大小，更不必花很多时间去寻找适合尺寸的筒夹来夹持钻头，并保证钻头左右齿角的对称性，钻头唇角度可依需求任意调整。
2、可研磨钻头的静点，并可研磨一般钻头研磨机无法研磨的木工钻头及阶梯钻、端铣刀端部，皆于同一家具便可完成。
3、机构动作简单，使用方便，无研磨经验的小孩及眼里较差的老人家都能利用本机研磨出师傅级的钻头。
Product featuese:
Usinga special drill chuck holder,it can grind the drills rang from 0.8 to 26mm,onechuck can hold different-sized drills.You do not need to buy a range of chucks togrind different-sized drills,You do not need measuring rules to measure thesizes of the drills that you want to grind.It can also save you times.So you donot need to look for the perfect-sized chuck to hold the drills.It guaranteesthe symmetry of the drill’s two sides.The angles of the drill can be adjustedaccordingly.
Itcan grind the central point of the drill.It can also grind the wood workingdrill bit and setp drill bit,end mill front,which average drill grinders cannot accomplish.You can complete different tasks using the same chuck.
It’seasy to use.children with no grinding experience and the elderly with pooreyesight can use this machine to produce excellent drill bit.
技术参数 Technicalparameter:
| 机型 | JY-26 | Type | JY-26 |
| 尺寸LxWxH | 400x280x250mm | Size LxWxH | 400x280x250mm |
| 研刀磨刀具直径 | 0.8~26mm | Grinding tool diameter | 0.8~26mm |
| 主轴马达 | 1/2HP | Motor | 1/2HP |
| 砂轮转速（60Hz） | 3420RPM | The speed of the grinding wheel(60Hz) | 3420RPM |
| 净重 | 20Kg | Net weight | 20Kg |
| 毛重 | 27Kg | Gross weight | 27Kg |
