我公司自主研发的新型的激光切割生产线，将激光七个技术与卷材开卷送料技术巧妙地结合，通过系统控制的激光切割头在激光切割平台上进行不停机的连续切割，代替压力机及模具，实现了对金属带料的自动落料，突破了原有激光切割设备只能对单张板进行切割作业的工艺瓶颈，能够将卷材在带料运动中使用激光切割机对其进行飞割（跟随切割），解决了连续的金属和非金属带料的无模具快速下料问题，降低了下料的设备的投资及模具消耗成本并且有效提高材料的利用率。
The new laser cutting production line independently developed by our company ingeniousty combines the laser cutting technology with the coil uncoiling and feeding technology. Through the laser cutting head controllecl by the system, the continuous cutting is carried out on the laser cutting platform without stopping, instead of the press and mokJt which realizes the automatic blanking of the metal strip, and breaks through the original laser cutting equipment that can only cut the single sheet The technological bottleneck of the operation can make the coil fty cut (follow cutting) with laser cutter in the strip movement, sofve the problem of continuous metal and non-metal stmentstrip rapid blanking without mould, reduce the investit of blanking equipment and mould consumption cost, and effectiveiy improve the utilization rate of materials.
◆设备投资低:与现有大型落料生产设备相比,激光切割落料生产线设备质量小，能耗低,且无需复杂的设备基础，大大降低了前期投资
和后期维护使用成本。
◆产出效率高:与现有激光切割设备相比，激光切割落料生产线使用卷料进行坯料生产,代替了卷材先切片再在设备上切割的生产工艺，
提高了生产效率。
◆灵活性高:无需制造模具,采用*的排样软件及控制系统，产品规格形状转换迅速,适合各种批量产品生产。
◆维护成本低:采用创鑫光纤激光切割器,性能可靠;同时激光切割速度快,不锈钢的切割速度可达到每分钟45米/分钟(厚度1mm时)，
可快速完成切割下料。
◆产品品质高:采用高精度的校平机高精度的送料及切割系统，可适应各种金属材料的零件坯料生产。
◆使用成本低:由于不需要模具进行冲压，降低了模具制造和维护费用;同时设备没有使用大型压力机，生产能耗大大降低，也降低了环
境噪音.
◆材料利用率高:因为使用卷料进行连续生产,不会产生单片时料头料尾的损耗;同时设备采用优化排样，将各种形状的件组合进行无
搭边切割，减少了材料损耗,提高了材料利用率。
◆Low equipment investment: compared with the existing large-scale blanking production equipment, the laser cutting blanking
production line equipment has the advantages of small quality, low energy consumption, and no complex equipment foundation, greatly
reducing the initial investment and later maintenance and use costs.
◆High output efficiency: compared with the existing laser cutting equipment, the laser cutting blanking production line uses coiling
for billet production, instead of the production process that the coiling is sliced frst and then cut on the equipment, which improves
the production efficiency. High fexibilit. no need to make mold, advanced layout software and control system are adopted, product
specifications and shapes are transformed rapidly, which is suitable for various batch production.
◆Low maintenance cost with Chuangxin fiber laser cutter, the perfomance is reliable; at the same time, the laser cutting speed is fast,
the cutting speed of stainless steel can reach 45m I min (when the thickness is 1mm), and the cuting and blanking can be completed
quickly.High product quality: adopt high-precision leveler, high-precision feeding and cutting system, which can adapt to the production
of parts blank of various metal materials.
◆Low cost of use: since no die is needed for stamping, the cost of die manufacturing and maintenance is reduced; at the same time, the
equipment does not use a large press, so the production energy consumption is greatty reduced, and the environmental noise is also reduced.
◆High material tlilization rate: because of continuous production with coil, there will be no loss of material head and tail when single
piece is used; at the same time, the equipment adopts optimized layout to cut parts of various shapes without overlap, which reduces
material loss and improves material utilization rate.
