西安高性能珩磨机|EDHM13T珩磨机

EDHM13T缸体伺服珩磨机
EDHM13T Cylinder servo honing machine

■机床主体采用高强度铸铁铸件，铸件经过二次时效处理

■高刚性高精度直线导轨和精密滚珠丝杠，确保机床运动高精度及精度稳定性。

■双轴结构，由伺服电机控制两轴间隔方便调整。

■主轴旋转、主轴往复、涨缩进给均采用伺服电机控制，保证位置、速度、力矩的精确控制。

■可加工精准的网纹，可满足特殊的珩磨要求，如盲孔珩磨、大夹角网纹珩磨。

■根据设定角度及主轴转速来控制主轴往复速度，可实现精准的网纹加工。

■伺服电机加滚珠丝杠副的进给方式，可以精确地实现微量级进给，轻松控制工件尺寸达到微米级

■机床采用自动上下料装置，降低劳动强度

■ Machine body adopts high strength cast iron castings, casting two times after aging treatment.

■ High rigidity and  high precision linear slide guide and precision ball screw, ensure high precision machine tool motion ａnd the precision stability

■ Biaxial structure, consisting of a two-axis servo motor control convenient interval adjustment.

■ The rotation of the spindle, reciprocating, collapsible feeding adopts servo motor control, ensure the

precise control of position, speed, torque.

■ Processable accurate textured, honed to meet the special requirements, such as blind hole honing, honing textured large angle.

■ According to the set angle and spindle speed to control the stroke speed, enabling precise texture processing. ■ Feed servo motor and ball screw, can accurately realize micro feeding, easy control of workpiece dimension

achieve micron level

■ The machine adopts automatic loading and unloading device, reduce labor intensity.

■机床冷却系统为循环冷却，采用双油箱设计，磁分式纸带过滤机两级过滤,并使用油冷机强制冷却。
■ Machine tool cooling cycle cooling system, dual fuel tank design, magnetic tape filter two-stage filtration fraction, and an oil cooler forced cooling.

■高刚性高精度直线导轨和精密滚珠丝杠，确保机床运动高精度及稳定性
■ High rigidity precision linear guide and precision ball screws to ensure high accuracy and stability of the machine operation

■采用在高性能运动控制器基础上设计开发的珩磨机控制系统，转为珩磨加工定制的人机界面，使珩磨操作过程控制简单化、自动化和可视化
■ Using high-performance motion controller based on the design and development of dedicated control system honing machine, honing into a customized user interface, making the process of honing operation control simplification, automation and visualization

■ 缸体加工珩磨头
■ Honing the cylinder head machining

■主轴采用单独配重系统，互不影响，大大提高了工作时的稳定性.
■ Spindle separate counterweight system, independently of each other, greatly improving the stability at work.

■集中润滑系统间歇供油，延长滑动部件使用寿命。
■ Intermittent oil lubrication system, to extend the service life of the sliding member.

EDHM13T缸体伺服珩磨机规格参数