规格参数
※万向节注意事项：
1.调整时不能超过规定的角度15度
2.如超过此极限心轴易磨损或断裂
3.工作时应经常加润滑油脂
※Note of cardan Joint
1.Do not set the angle to more than the specifled l5 degrees.
2.If the limit is exceeded，the shaft will be easy to wear or break.
3.During work，lubrication should be added frequently.
型号 Type | SWU165 | SWU200 | SWU250 | SWU100×165 | SWU120×200 | SWU120×300 |
筒夹规格Collet/ 大钻孔能力 Max.Drilling Capacity | ER20/13 ER25/16 | ER20/13 ER25/16 | ER20/13 ER25/16 | ER20/13 ER25/16 | ER20/13 ER25/16 | ER20/13 ER25/16 |
转速比 Gear Ratio | 1∶1 | 1∶1 | 1∶1 | 1∶1 | 1∶1 | 1∶1 |
小距离（二轴间） Lowest Distance(Two Spindle) | 42 | 42 | 42 | 42 | 42 | 42 |
大轴心范围 Max.Range of Centers | 165 | 200 | 250 | 100×165 | 120×200 | 120×300 |
轴数 Spindle | 2-10 | 4-12 | 4-12 | 3-8 | 4-12 | 6-14 |
