品牌：NTH
1. 适用于轴类工件加工，卡盘具有补偿式夹紧和后拉的功能，对中心的补偿量为5mm。
2. 尾座支撑工件，卡盘补偿夹紧后，把工件拉向中心，依此加工后同轴度会非常好。
1. It's suitable for shaft machining, the chuck have the function of compensation clamping and pulling back, the compensation size is 5mm.2. The tailstock support the shaft, after compensation clamping, the chuck pull the shaft back to center, better concentricity can be made.
UNIT: mm
规格 Spec | 楔心行程 | 爪行程直径 | 大夹持直径 | 小夹持直径 | 容许油压缸推力 Max.D.B.Pull | 大夹持力 |
|---|---|---|---|---|---|---|
FWD-06A5 | 16 | 13 | 35 | 6 | 14.7(1500) | 25.0(2550) |
FWD-08A6 | 20 | 18 | 65 | 16 | 19.6(2000) | 34.3(3500) |
规格 Spec 补偿量 高转速 惯性矩 重量 适合油压缸 大使用压力 FWD-06A5 5 3500 0.5 13 SNK-100 2.1(21) FWD-08A6 6 3000 0.5 22 SNK-100 2.8(28)
型号 Model
Compensation
(mm)
Max RPM
I
kg*m2
Weight
kg
Matched cylinders
Max.pressure
Mpa(kgf/cm2)
规格 Spec | A | B | C(H6) | D | D1 | D2 | E | G |
|---|---|---|---|---|---|---|---|---|
FWD-06A5 | 168 | 116 | 140 | 104.8 | 82.56 | 24 | 15 | 4--20 |
FWD-08A6 | 210 | 127 | 170 | 133.4 | 106.38 | 32 | 17 | 9--29 |
规格 Spec | H | J | L | M | N | P | T |
|---|---|---|---|---|---|---|---|
FWD-06A5 | 38 | 50 | 52 | M10x120 | 55 | 14 | 34 |
FWD-08A6 | 38 | 58 | 61 | M12x125 | 67 | 20 | 41.5 |
备注：FWD-06为弹性，在夹持工件时，以中心为基准补正，同时可使工件接触到端面，便于轴向定位。
Remark: FWD-06 chuck’s center is spring type, when clamping, it’s based on the center, the workpiece could be pulled onto the position base, so as to make axial postion.
保留技术更改的权利,恕不另行通知 Subject to technology changes without prior information
非标需求可定做 Non-standard requirements can be made
