高速，轻量整合型注气回转油压缸，可经由后端回转继手供给空气内建逆止阀自锁机构，泄压阀及行程控制近接开阀。
内建逆止阀自锁机构，泄压阀及行程控制近接开阀。
安装时可由后端锁固之。
泄油孔配管务必单独接回油压槽，以避免产生背压。
使用时，请混入微量的油雾。
For short from,lightc weight and high speed rotary cylinder.To allow compressed air to be feed from the rear end of the distributor through the rotating union.suitable for vertical lathe.
Built-in safety check valves,pressure relief valves and proximity seneor.
Can screw it from the rear end of the cylinder when mounting.
The drain port should be independently connectde to oil tank to avoid back pressure.
When used,a little oil mist should be contained.

尺寸单位/Size unit: mm

规格 Spec 型号 Model	活塞面积 Piston area cm2 押侧Extend	活塞面积 Piston area cm2 拉侧Retract	活塞行程 Piston stroke mm	高转速 Max RPM
SLAN-E150	174.4	160.8	30	5500
SLAN-E200K	292.4	274.9	35	4000
SLAN-E200L	292.4	265.4	50	4000
SLAN-E250	465.2	438.2	60	2000

规格 Spec 型号 Model	大使用压力 Max.Operating Pressure Mpa(kgf/cm2)	注气部高使用压力 Air connection Max.pressure Mpa(kgf/cm2)	惯性矩 I kg*m2	重量 Weight kg
SLAN-E150	4.0(40)	0.8(8)	0.06	14.9
SLAN-E200K	4.0(40)	0.8(8)	0.19	29.1
SLAN-E200L	5.0(50)	0.8(8)	0.21	30.4
SLAN-E250	5.0(50)	0.8(8)	0.43	47.2

规格 Spec 型号 Model	A	B	C	D1	D2	E H7	F	G Max	G Min	H
SLAN-E150	150	30	205	180	130	110	45	60	30	99
SLAN-E200K	195	35	257	225	145	120	55	73	38	120
SLAN-E200L	195	50	257	225	170	125	65	80	30	135
SLAN-E250	245	60	307	275	220	160	65	85	25	165

规格 Spec 型号 Model	J	K	L	L1	L2	M H8	M1	N	P	Q
SLAN-E150	177.5	M30×3.5	M12×24	M12×105	18.5	32	10	50	12.5	114
SLAN-E200K	239	M36×4.0	M16×30	M16×130	27	38	12	65	15	150
SLAN-E200L	254	M42×3.0	M16×30	M16×145	27	45	12	65	15	150
SLAN-E250	280	M42×3.0	M20×35	M16×175	28	45	12	65	15	150