主要技术参数Main technical parameters | |||
项目 Project | 单位Unit | LX-1580 | LX-1690 |
工作台Table | |||
工作台尺寸Table size (length x width) | mm | 800x1700 | 900x1800 |
T型槽(宽x槽数) T- slot (width x slot number) | mm | 22x5 | 22x5 |
大载重 maximum loading | kg | 1500 | 1600 |
工作台面至地面距离 Distance from table surface to ground | mm | 1000 | 1050 |
行程 Travel | |||
X轴行程Longitudinal travel | mm | 1500 | 1600 |
Y轴行程 Lateral travel | mm | 800 | 900 |
Z轴行程 Vertical travel | mm | 700 | 皮带头680/齿轮头 650 Belt head680/ gear head650 |
主轴鼻端至工作台面距离 Distance from spindle nose to table surface | mm | 170-870 | 皮带头160-840/齿轮头350-1000 Belt head160-840/ gear head350-1000 |
主轴中心距至机柱滑道距离 Distance from spindle center to column slide | mm | 800 | 950 |
主轴 Spindle | |||
主轴锥度 Spindle taper |
| BT50 | BT50 |
主轴转速 Spindle speed | rpm | 6000 | 皮带头6000/齿轮头4500 Belt head 6000/ gear head 4500 |
主轴档数 Spindle number |
| 1 | 皮带头1/齿轮头2 Belt head 1/ gear head 2 |
主轴冷却/润滑方式 Spindle cooling / lubrication mode | 油冷/油脂润滑 Oil / grease lubrication | C04PT | C04PT |
油压箱/齿轮头 Oil tank / gear head |
|
| 齿轮头SHC-027X(60L) Gear head SHC-027X(60L) |
进给Feed | |||
切削进给 Cutting feed | mm/min | 1-10000 | 1-10000 |
快速进给 Rapid feed | m/min | 15/15/15 | 15/15/15 |
小进给量 Minimum feed | mm | 0.001 | 0.001 |
马达 Motor |
| ||
主轴马达 Spindle motor | kw | 15/18.5 | 皮带头18.5/22 齿轮头15/18.5 Belt head 18.5/22 Gear head 15/18.5 |
三轴马达X/Y/Z axis motor | kw | 7/7/7 | 7/7/7 |
冷却泵浦 Coolant pump | Kw | 1.64 | 1.64 |
水箱容量 Water tank capacity | m3 | 0.62 | 0.38 |
刀库Tool | |||
刀库种类 Type of tool |
| 门笠/圆盘 Armless/Arm type | 门笠/圆盘 Armless/Arm type |
刀库规格 Tool specification |
| BT50 | BT50 |
刀库容量 Tool storage capacity |
| 20/24 | 20/24 |
大*直径x长度 Max tool diameter x Length |
| Φ110x300 | Φ110x300 |
安装需求 Installation requirements | |||
电力容量 Power capacity | KVA | 30 | 35 |
气压压力 Air pressure | Kg/cm2 | 5-7 | 5-7 |
空气流量 Air flow | l/min | 100 | 100 |
占地空间 Floor space | mm | 4310x3100x3200 | 4900x3100x3350 |
净重 Net weight | kg | 13000 | 16500 |